Aberdeenshire · Scotland
Bath Resealing for Montrose homes
Bath resealing in and around Montrose: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Mould you can’t clean out
- An untidy old seal
- Silicone coming away from the tiles
About our bath resealing in Montrose
A fresh seal protects your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and resealing puts a stop to that. Whether it’s gaps by the taps and sealant that’s split or lifting, we can usually put it right.
Every job is backed for twelve months in Montrose and everywhere else. If something goes wrong with the work, we come back.
- Area
- Montrose (DD10)
- Region
- Aberdeenshire
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Montrose
Montrose is about 26 miles north-east of Dundee, in Aberdeenshire. Wherever you are in the DD10 postcode area, we carry out the work at your property. Montrose is one of 161 places in Aberdeenshire where we work. You can also see our page for Edinburgh, about 60 miles away.
Our visits in DD10 work the same way as everywhere else we cover. You will find streets such as Market Street, High Street and Murray Lane, and we cover them all. Montrose is on the A92 and A935, so it’s easy for us to reach. We also travel to Ferryden (1 mile south), Kirkton of Craig (2 miles south), Hillside (2 miles north), Craigo (4 miles north-west) and St Cyrus (4 miles north-east). We also work in nearby towns such as Laurencekirk (8 miles north), Inverbervie (11 miles north-east) and Johnshaven (8 miles north-east). Montrose is one of the larger places we cover in Aberdeenshire.
Landmarks near Montrose
Around Montrose, we work in homes near Montrose, Royal Arch Bar and Montrose Academy and the streets around them. Montrose has its own railway station: Montrose station. Other landmarks nearby include William Lamb Sculpture Studio (within half a mile south) and Montrose Castle (0.5 miles south-west). Open spaces near Montrose include Duns Dish and Montrose Basin.
How the visit works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes about two hours for a bath. At the end we talk you through the curing time and the aftercare.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
How to prepare
- Open a window if you can
- Clear the area around the damage
- Tell us about parking, stairs or access
Get a quote
To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
FAQs for Montrose
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Why does my sealant keep splitting?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so let us know about it.
What areas do you cover?
We cover the entire UK, including Montrose and the rest of Aberdeenshire. Send your postcode with your photos and we’ll offer you dates.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Why does my sealant keep going mouldy?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Use the extractor fan
- Wipe the joints dry after use
- Reseal at the first sign of lifting
- Store bottles on a shelf
Leave the sealant to cure for the time we give you, normally about a day.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
Trays are sealed with weight on them, for the same reason.
When we would advise against a repair
In fairness, some problems need a different fix:
- A flexing bath
- Very wide gaps that need a trim
- Loose tiles, which need refixing first
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Wet rooms
- Kitchen worktops & sinks
Is resealing worth it?
Putting new silicone over old doesn’t last. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why book with us
- One visit for most repairs
- A fixed quote before you book
- CHAS and Constructionline accredited
- We will tell you if it’s not worth repairing
Read our pricing.
What we’re called out for in Montrose
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning only removes the surface.
Common reasons people in Montrose contact us are:
- An untidy old seal
- Damp near the bath
- Gaps by the taps
- Black mould in the sealant
What your quote should include
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
More services for Montrose
About our accreditations · Every repair comes with a one-year guarantee.
