Kent · England
Bath Resealing for Mott's Mill homes
We travel to Mott's Mill for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Missing sealant behind the taps
- Black spots in the silicone
- Leaks at the edges
Different materials, different repairs
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Bath resealing in Mott's Mill, done in place
We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. Most jobs take a couple of hours. Common call-outs are for silicone smeared on tiles and mould you can’t clean out, on wet rooms, shower trays & enclosures and kitchen worktops & sinks.
All our work is covered by our one-year guarantee, wherever you are in Kent.
- Location
- Mott's Mill (TN3)
- County
- Kent
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why reseal now?
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why choose Surface Doctor in Mott's Mill
- One visit for most repairs
- Every repair guaranteed for a year
- Rooms protected and left tidy
- We come to you, anywhere in the UK
Read our prices page.
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes around two hours. We tidy up before we leave and let you know when you can use it again.
- The surrounding area is protected and the joints masked.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
Getting ready for the visit
- Make sure the room can be ventilated
- Let us know about parking or access
- Point us to the nearest place to park
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
What bath resealing costs
We charge the same across the UK, including Mott's Mill. What changes the price is:
- Whether we combine several jobs
- How many areas need work
- Access to the area
- How hard the colour is to match
Our prices are the same across the UK, with no extra for Mott's Mill. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
When you take your pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- The material, if you know it
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Also near Mott's Mill
More services for Mott's Mill
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Dry the seal after bathing
- Let steam out after showers
- Reseal when black spots will not clean off
- Clean the sealant gently and regularly
Run the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.
When we’d advise against a repair
A repair is not right for every job, including:
- Gaps too big for silicone alone
- Hidden water damage
- A bath or tray that moves, until its support is fixed
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Mott's Mill
- Shower trays & enclosures
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
- Wet rooms
About Mott's Mill
Mott's Mill is about 3 miles north of Crowborough, in Kent. Anywhere in TN3, a technician comes to you. We work in 922 places in Kent. Our nearest city page is London, about 30 miles away.
Postcode districts we cover here: TN3. We also cover the places around Mott's Mill: Boarshead (2 miles south), Friar's Gate (2 miles south-west), Marden's Hill (2 miles south-west), Steel Cross (2 miles south) and Crowborough (3 miles south). Further out, we also cover Sevenoaks (13 miles north), Royal Tunbridge Wells (5 miles north-east), Tonbridge (8 miles north-east), Paddock Wood (11 miles north-east), Southborough (6 miles north-east) and Edenbridge (9 miles north-west).
Local landmarks in Mott's Mill
Around Mott's Mill, we work in homes near Church of St Thomas the Apostle and Groombridge St Thomas' Church of England Primary School, among other places. For rail, the closest station is Eridge station, about 1.3 miles east. Nearby you’ll also find Crowborough War Memorial Hospital (3.2 miles south) and Bolebroke Castle (3.3 miles north-west). Open spaces near Mott's Mill include Broadwater Warren RSPB Reserve.
Mott's Mill questions
Do you seal over the old sealant?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you come to Mott's Mill?
Yes, we do. We send a technician to Mott's Mill for every job, with no extra charge for travel.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do the materials smell?
There may be a mild smell during the work.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Are there extra charges for Mott's Mill?
Travel is included in the price, and we charge the same wherever you are.
About our accreditations · Every repair comes with a one-year guarantee.
