East Sussex · England

Bath & shower resealing (mastic) in Steel Cross, East Sussex

Bath resealing for Steel Cross, without a refit. Get a fixed price from your photos, then book a visit.

  • Discoloured, yellow sealant
  • Damp near the bath
  • A messy previous reseal
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Steel Cross?

Different materials, different repairs

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Baths

Baths are resealed with water in them, to open the joint fully.

Bath resealing at your home in Steel Cross

Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, as one neat, continuous bead. We regularly repair basins & vanity units, shower trays & enclosures and kitchen worktops & sinks, and common reasons people get in touch are damp near the bath and silicone coming away from the tiles.

You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.

Location
Steel Cross (TN6)
Area hub
East Sussex
Warranty
12 months on all our work
Price
Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Common questions in Steel Cross

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.

How much does bath resealing cost in Steel Cross?

Because every job differs, we price from pictures. You will get a fixed figure before you book.

Is my repair covered?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

How long does silicone take to cure?

We will give you the curing time.

Can you quote from pictures?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

What happens after I send pictures?

We come back with a fixed price, generally with dates to choose from. You are under no obligation.

What happens on the day

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a couple of hours, including clearing up.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Have a window or extractor fan available
  • Make sure the area is dry

Ask for a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a fixed price

Read more

Keeping it looking good

It’s all simple stuff, just a few sensible habits:

  • Do not stand toiletries on the seal
  • Keep the joints dry
  • Reseal at the first sign of lifting
  • Open a window after bathing

Let it cure fully before using the bath or shower, normally about a day.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

What we are called out for in Steel Cross

Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.

Typical reasons for a call-out include:

  • Mould you cannot clean out
  • Sealant that’s split or lifting
  • A messy previous reseal
  • Leaks at the edges

Questions to ask before booking

  • What happens if they find more damage
  • Whether the colour is mixed to match
  • Who turns up on the day
  • If travel is included in the price

10 questions to ask before you book

Landlords, agents and businesses in Steel Cross

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Why reseal now?

Sealing over old silicone is a false economy. It soon peels, and traps mould underneath. A proper reseal removes the old first. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Steel Cross customers choose us

  • Same prices wherever you are
  • Accredited with CHAS, Constructionline and SafeContractor
  • Everything repaired in place
  • Dust sheets down, tidy finish

Read our full price list.

When we would advise against a repair

Before you book, it’s worth knowing the limits too:

  • Tiles that move, until they’re refixed
  • A flexing bath
  • Rotten walls or floors behind the bath

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Kitchen worktops & sinks
  • Baths
  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms

Steel Cross and the surrounding area

Steel Cross is about 1 mile north-east of Crowborough, in East Sussex. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Steel Cross is one of 289 places in East Sussex where we work. Our jobs stretch from Steel Cross to London (about 32 miles away).

Postcode districts we cover here: TN6. From Hindleap Avenue, Payne Close and Vachery Street or a nearby road, a technician can come to you. We also cover the places around Steel Cross: Boarshead (1 mile north), Crowborough (1 mile south-west), Jarvis Brook (1 mile south), Marden's Hill (2 miles west) and Friar's Gate (2 miles west). We also work in nearby towns such as Lewes (15 miles south-west), Hailsham (14 miles south), Uckfield (7 miles south-west), South Malling (15 miles south-west), Heathfield (7 miles south-east) and Southover (15 miles south-west).

What’s near Steel Cross

Typical jobs here are in homes near The Boars Head Inn, Beacon Academy and Sir Henry Fermor Church of England Primary School. The nearest railway station is Crowborough station, roughly 1.2 miles south of the centre. Nearby you’ll also find Crowborough War Memorial Hospital (1.3 miles south-west). Green spaces nearby include Crowborough Country Park.

Map of Steel Cross © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.