Hampshire · England
Bath Resealing in Mullenspond
Bath, shower and sink resealing with new mould-resistant silicone in Mullenspond, carried out at your home and guaranteed for a year.
- Missing sealant behind the taps
- Gaps in the seal
- Water getting behind the bath or tray
How we price bath resealing
Each job gets its own fixed quote. This is what makes a difference:
- Previous DIY repairs that have to come out
- The type of damage
- The material
- Where the damage is and how we get to it
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from pictures
You can typically get a fixed quote without us visiting. To make it quick:
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
Send us photos of the damage and a wider shot of the entire item, with your SP11 postcode, and we will reply with a fixed quote.
About our bath resealing in Mullenspond
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Our repair technicians work on baths, kitchen worktops & sinks and basins & vanity units, and people most frequently call us about black spots in the silicone and gaps in the seal.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Area
- Mullenspond (SP11)
- County
- Hampshire
- Guarantee
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. You can expect it to take about two hours for a bath, and we’ll tell you if anything changes.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
- Clear the area around the damage
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Related advice
Also near Mullenspond
Also in Mullenspond
How to care for the repair
It’s all simple stuff:
- Reseal at the first sign of lifting
- Ventilate the bathroom well
- Let steam out after showers
- Wipe the joints dry after use
Keep the room well ventilated, and wipe the joints after use so mould struggles to take hold.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Why it’s worth resealing in Mullenspond
Putting new silicone over old doesn’t last. It peels within weeks, and traps mould underneath. We remove the old sealant completely. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Why us?
- We will tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- Typically one visit, start to finish
Take a look at our prices page.
Landlords, agents and businesses in Mullenspond
We work for landlords, letting agents and housing providers in Mullenspond as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Mullenspond and nearby
Mullenspond is about 4 miles west of Andover, in Hampshire. We visit homes and businesses in Mullenspond, so there’s no workshop to go to. Mullenspond is one of 683 towns and villages in Hampshire where we work. We work right across the region, from Mullenspond to London (67 miles away).
Our visits in SP11 are booked in the same way as anywhere else. From Amesbury Road and Wiremead Lane or anywhere nearby, a technician can come to you. Close by, we cover East Cholderton (1 mile south), Thruxton (1 mile west), Fyfield (1 mile north-west), Weyhill (1 mile north-east) and Red Post Bridge (2 miles east). Larger places within reach include Winchester (15 miles south-east), Andover (4 miles east), Hyde (15 miles south-east), Tidworth (4 miles north-west), Weeke (14 miles south-east) and Stanmore (15 miles south-east).
Around Mullenspond
In Mullenspond, that means homes near White Horse Inn, Church of St Nicholas and Amport Church of England Primary School, among other places. The closest station to Mullenspond is Grateley station, about 3.4 miles south-west. Nearby you will also find Ludgershall Castle (3.9 miles north-west) and Andover War Memorial Hospital (3.5 miles east). Not far away are Mill Lake and Quarley Hill.
Different materials, different repairs
Shower trays
We put weight on a tray before sealing it, for the same reason.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Mullenspond questions
What happens next?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
How long does a reseal take?
Most reseals take about two hours. Leave it to cure before use.
Why does the silicone keep cracking?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Are there extra charges for Mullenspond?
We don’t add a call-out fee. Your fixed price includes everything.
What areas do you cover?
Across the UK, and that includes Mullenspond. Prices do not change with location.
What we cannot put right
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Movement in the bath or tray
- Very wide gaps that need a trim
- Loose tiles, which need refixing first
If in doubt, send pictures and we will say what we think.
What we work on
- Shower trays & enclosures
- Wet rooms
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
About our accreditations · Every repair comes with a one-year guarantee.
