Hampshire · England
Bath re-enamelling & resurfacing in Mullenspond, Hampshire
Full bath re-enamelling and resurfacing at your home in Mullenspond, with a one-year guarantee on every repair.
- Resurfacing from £350
- An old resurfacing that’s failing
- Enamel that is lost its shine and feels rough
How we handle bath re-enamelling in Mullenspond
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. If you’re dealing with a dull, rough surface that won’t come clean and a coloured bath you want in white, we can help, on basins & shower trays, pressed steel baths and acrylic baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Mullenspond (SP11)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. You will know the full cost before you book. We look at:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- Doing more than one item at once
- What kind of damage it is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Getting a price from pictures
Phone pictures are fine. Just ensure we can see:
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- What it’s made of, if you know
- Where you are, by postcode
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
FAQs for Mullenspond
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Do you need bath re-enamelling in Mullenspond?
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.
Signs it’s time to call us include:
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
Questions to ask before you book
- If travel is included in the price
- How long it needs to cure
- Whether the colour is mixed to match
- Aftercare advice
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How the visit works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a full day, tidy-up included.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the following day.
Before we arrive
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
Ask for a price
If you are in Mullenspond and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Places near Mullenspond
What else we do in Mullenspond
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Fix dripping taps quickly
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
- Don’t let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
What we can’t put right
To be straight with you, some problems need a different fix:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Mullenspond, we will quote for several properties at once. Just send photos for each address and we’ll price them together.
Mullenspond and the surrounding area
Mullenspond is about 4 miles west of Andover, in Hampshire. Across the SP11 area, we carry out the work at your property. Mullenspond is one of 683 towns and villages in Hampshire where we work. Our jobs stretch from Mullenspond to London (67 miles away).
Jobs in SP11 work the same way as everywhere else we cover. Streets in the area include Amesbury Road and Wiremead Lane, and we cover them all. Neighbouring places we cover include East Cholderton (1 mile south), Thruxton (1 mile west), Fyfield (1 mile north-west), Weyhill (1 mile north-east) and Red Post Bridge (2 miles east). Within a short drive, we also cover Winchester (15 miles south-east), Andover (4 miles east), Hyde (15 miles south-east), Tidworth (4 miles north-west), Weeke (14 miles south-east) and Stanmore (15 miles south-east).
Local landmarks in Mullenspond
Around Mullenspond, we work in homes near White Horse Inn, Church of St Nicholas and Amport Church of England Primary School. The nearest railway station is Grateley station, about 3.4 miles south-west of the centre. Nearby you’ll also find Ludgershall Castle (3.9 miles north-west) and Andover War Memorial Hospital (3.5 miles east). For a walk, there is Mill Lake and Quarley Hill.
About our accreditations · Every repair comes with a one-year guarantee.
