Kent · England
Bath Resealing for Murston homes
Bath resealing in and around Murston: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Stained silicone
- Gaps by the taps
- Black mould in the sealant
How the visit works
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for about two hours for a bath from start to finish. Before we go, we will explain how long to leave it and how to look after it.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Advice
Bath resealing in Murston, done in place
We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours. If you’re dealing with water getting behind the bath or tray and black spots in the silicone, we can normally put it right.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- Murston (ME10, ME9)
- Area hub
- Kent
- Cover
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Towns and villages near Murston
Also in Murston
What we can’t put right
Before you book, it’s worth knowing the limits too:
- Very wide gaps that need a trim
- Hollow or loose tiles
- Movement in the bath or tray
If in doubt, send pictures and we will say what we think.
What we work on
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
- Baths
- Basins & vanity units
Why reseal now?
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why Murston customers choose us
- We leave the room as we found it
- A fixed quote before you book
- Accredited with CHAS, Constructionline and SafeContractor
- Usually one visit, start to finish
Read our full price list.
Common questions in Murston
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What does bath resealing cost?
The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Do you cover Murston?
Yes. We work across the UK and travel to Murston and the rest of Kent. Send us pictures for a fixed quote, or call 0345 017 0787.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Prices and what affects them
We give every job a fixed price from pictures. These are the things that affect it:
- Where the damage is and how we get to it
- The type of damage
- Whether old repairs or coatings need taking off
- How much damage there is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
What we’re called out for in Murston
Even good sealant eventually discolours particularly in a well-used bathroom. Steam, soap and movement all take their toll.
The things customers generally mention when they call are:
- Silicone smeared on tiles
- Stained silicone
- Mould you cannot clean out
- Missing sealant behind the taps
Comparing quotes
- How the colour is matched
- How changes to the job are handled
- How your room will be protected
- Who turns up on the day
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Murston, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Use the extractor fan
- Open a window after bathing
- Replace the seal when mould sets in
- Clean the joints with a mild cleaner
Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.
Murston and the surrounding area
Murston is about 1 mile east of Sittingbourne, in Kent. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 922 towns and villages in Kent, from the larger towns to small villages. Our jobs stretch from Murston to London (38 miles away).
Our visits in ME10 and ME9 are booked in the same way as anywhere else. Local streets include Oak Road, Glebe Lane and Leigh Road, all of which we cover. Neighbouring places we cover include Milton Regis (1 mile north), Sittingbourne (1 mile west), Tonge Corner (1 mile east), Rodmersham (1 mile south) and Kemsley (1 mile north). Within a short drive, we also cover Maidstone (11 miles south-west), Ashford (15 miles south), Canterbury (15 miles east), Whitstable (12 miles east), Faversham (6 miles east) and Minster (6 miles north).
Landmarks near Murston
We visit homes around Sunny Bank Primary School, Church of All Saints and The New Inn and the streets around them. Also close by are Sittingbourne Community College (0.5 miles south) and Milton Creek Country Park (1 mile north). Murston’s nearest station is Sittingbourne station, about 0.7 miles west. Well-known places in the area include Sittingbourne and Milton Urban District (1.1 miles north-west) and Bayford Court (under half a mile west).
About our accreditations · Every repair comes with a one-year guarantee.
