Kent · England
Bath Resealing for Kemsley homes
Bath resealing across Kemsley and nearby, done in a single visit in most cases and guaranteed for a year.
- Gaps by the taps
- Mould you cannot clean out
- Stained silicone
Bath resealing in Kemsley without replacing anything
We reseal baths, shower trays, basins and worktops. A typical reseal takes a couple of hours. Our repair technicians work on shower trays & enclosures, wet rooms and basins & vanity units, and the jobs we see most are an untidy old seal and black mould in the sealant.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Kemsley (ME10, ME9)
- Area hub
- Kent
- Guarantee
- 12 months on all our work
- Price
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Kemsley
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
When can I use the bath after resealing?
You will get the curing time from us, normally around a day.
Can I get a quote without a visit?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Why does my sealant keep splitting?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
What does bath resealing cost?
We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your ME10 postcode.
What happens once I’ve sent photos?
We review the photos and send a fixed quote with dates.
Repairs by material
Shower trays
Trays are sealed with weight on them, for the same reason.
Baths
Baths are resealed with water in them, so the joint is at its widest.
Landlords, agents and businesses in Kemsley
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Also near Kemsley
Other services in Kemsley
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Use the extractor fan
- Open a window after bathing
- Give the seal a regular clean
- Store bottles on a shelf
Avoid scraping the joints, and don’t stand bottles on the seal.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
How we price bath resealing
We charge the same across the UK, including Kemsley. The price reflects:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- The material
- Whether we combine several jobs
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Quotes from your pictures
You can take the pictures on your phone. Just ensure we can see:
- The material, if you know it
- A coin beside the damage so we can judge size
- A wider photo showing the whole bath or shower
- Good light, ideally daylight, without flash glare
The quickest way to a price is to send two or three photos through our quote form or call us. We will say straight away whether it can be repaired.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Where we work around Kemsley
Kemsley is about 1 mile north of Sittingbourne, in Kent. Across the ME10 area, we carry out the work at your property. Kemsley is one of 922 places in Kent we cover. Our jobs stretch from Kemsley to London (about 37 miles away).
Jobs in ME10 and ME9 work the same way as everywhere else we cover. Streets in the area include Court Road, Menin Road and Hurst Lane, and we cover them all. Other places close to Kemsley include Howt Green (1 mile west), Milton Regis (1 mile south-east), Sittingbourne (1 mile south), Iwade (1 mile north-west) and Murston (1 mile south). Further out, we also cover Maidstone (11 miles south-west), Whitstable (13 miles east), Faversham (7 miles south-east), Minster (5 miles north-east), Davington (7 miles south-east) and Foley Park (10 miles south-west).
Landmarks near Kemsley
Around Kemsley, we work in homes near Milton Creek Country Park, Parish Church of the Holy Trinity and The Three Hats Inn. You will also find Borden Grammar School (1.6 miles south) and Kemsley Primary Academy (less than half a mile north-east). There’s a railway station in Kemsley itself: Kemsley station. Well-known places in the area include Castle Rough (0.6 miles east) and Court Hall Museum (0.8 miles south-west).
- Parks and local facilities nearby include Sittingbourne and Milton Urban District (0.8 miles south-west)
Why it’s worth resealing in Kemsley
A reseal is one of the cheapest bathroom jobs there is. Leaving failed sealant can let water cause damage that costs far more to fix. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why book with us
- Work done at your home or business
- No extra charge for your area
- We will tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page.
Do you need bath resealing in Kemsley?
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.
If you can see any of these, send us a photo:
- Missing sealant behind the taps
- Damp near the bath
- Gaps in the seal
- Black mould in the sealant
What to look for in a quote
- Whether a trained technician does the job
- If travel is included in the price
- What happens if the damage is worse than the photos show
- How your room will be protected
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes about two hours for a bath in most cases. We leave the room clean and ready to use once it has cured.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
How to prepare
- Have a window or extractor fan available
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
Getting a price
Upload photos of the damage and a wider shot of the entire item, with your ME10 postcode, and we will come back with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
