North Tyneside · England

Bath & shower resealing (mastic) in Murton, North Tyneside

We travel to Murton for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Silicone coming away from the tiles
  • Black mould in the sealant
  • Old sealant that looks dirty
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Murton

Different materials, different repairs

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Baths

We fill the bath before sealing, so the joint is at its widest.

Bath resealing in Murton without replacing anything

We cut out all of the old sealant, deal with any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Whether it’s black mould in the sealant and unsealed corners, we can help.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Technician in a mask working on a freestanding roll-top bath
Location
Murton (NE29, NE27, NE25)
County
North Tyneside
Cover
12 months on all our work
Quote
Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes about two hours for a bath, and we finish with a tidy-up and a look at the finished work together.

  1. The surrounding area is protected and the joints masked.
  2. Old sealant and residue are removed.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Before we arrive

  • Tell us about parking, stairs or access
  • Make sure the room can be ventilated
  • Keep pets and children out of the room while we work

Getting a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a fixed quote

Advice

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

Where we work around Murton

Murton is about 1 mile south-west of Whitley Bay, in North Tyneside. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We cover 30 places across North Tyneside, from the larger towns to small villages. We work right across the region, from Murton to Newcastle upon Tyne (about 7 miles away).

We work across NE29, NE27 and NE25. That includes homes on Murton Lane, New York Road and Sherwood and the roads around them. If you’re just outside Murton, we cover New York (1 mile south), Earsdon (1 mile north-west), Whitley Bay (1 mile north-east), Chirton (2 miles south) and Tynemouth (2 miles south-east). Within a short drive, we also cover Wallsend (3 miles south-west), Longbenton (3 miles west), Killingworth (3 miles west), Seaton Delaval (3 miles north-west), Benton (4 miles west) and Seaton Sluice (4 miles north).

What’s near Murton

Around Murton, we work in homes near Monkseaton High School, Langley First School and Wellfield Middle School. Murton’s nearest station is Northumberland Park (Tyne and Wear) station, about 1.3 miles west. Well-known places in the area include Tynemouth Castle and Priory (2.9 miles east) and Stephenson Railway Museum (1.1 miles south).

  • Local facilities include Municipal Borough of Whitley Bay (2 miles north-east)
Map of Murton © OpenStreetMap contributors

Work for landlords and builders

We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Aftercare tips

It’s all simple stuff:

  • Use the extractor fan
  • Let steam out after showers
  • Keep bottles off the joints
  • Clean the sealant gently and regularly

Leave the sealant to cure for the time we give you, typically around 24 hours.

Damp below or loose tiles need checking quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

When to call us in Murton

Joints split if the bath or tray moves, often because it was sealed while the bath was empty.

Typical reasons for a call-out include:

  • Stained silicone
  • Silicone coming away from the tiles
  • Black mould in the sealant
  • Leaks at the edges

What to look for in a quote

  • How soon you can use it again
  • Whether a trained technician does the job
  • What happens if they find more damage
  • Whether cleaning and preparation are in the price

10 questions to ask before booking

Murton questions

How do I get a price for bath resealing in Murton?

The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Do you cover the entire of North Tyneside?

We cover the whole UK, including Murton and the rest of North Tyneside. Just include your postcode and we will confirm dates.

My seal keeps tearing. Why?

Normally because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.

What a repair cannot fix

In fairness, there are a few things a repair will not fix:

  • Loose tiles, which need refixing first
  • Very wide gaps that need a trim
  • Rotten walls or floors behind the bath

Send us photos and we’ll tell you honestly.

Materials we work on in Murton

  • Wet rooms
  • Basins & vanity units
  • Baths
  • Kitchen worktops & sinks
  • Shower trays & enclosures

Resealing in Murton: why it matters

Sealing over old silicone is a false economy. It peels within weeks, and traps mould underneath. We remove the old sealant completely. We charge the same wherever you are, with no extra for Murton. The job itself decides the price: how much damage, what it’s made of and how many items.

What you get with us

  • We will tell you if it’s not worth repairing
  • We leave the room as we found it
  • One price list for the whole UK
  • Generally one visit, start to finish

Read our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.