Buckinghamshire · England
Bath Resealing in Nash Lee
We travel to Nash Lee for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- Water getting behind the bath or tray
- Gaps in the seal
- Unsealed corners
Bath resealing at your home in Nash Lee
The key to a good reseal is getting all of the old silicone out. New silicone will not bond to old, which is why many DIY jobs peel. If you are dealing with an untidy old seal and discoloured, yellow sealant, we can help, whatever the material.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Location
- Nash Lee (HP17)
- Area hub
- Buckinghamshire
- Warranty
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
Arrival times are agreed in advance. On site, it takes around two hours in most cases. The room is left tidy and ready to use once it has cured.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Preparing for the visit
- Let us know if it has been repaired before
- Clear the area around the damage
- Have a window or extractor fan available
Getting a price
Send us a photo of the damage and one of the whole item, and tell us you’re in Nash Lee, and we will reply with a fixed price.
Read more
Also near Nash Lee
More services for Nash Lee
Covering Nash Lee
Nash Lee is about 4 miles south-east of Aylesbury, in Buckinghamshire. Customers in Nash Lee get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We cover all 263 towns and villages in Buckinghamshire, from the larger towns to small villages. Our jobs stretch from Nash Lee to London (about 35 miles away).
All of HP17 is within our area. If you’re just outside Nash Lee, we cover Terrick (1 mile south), Chalkshire (1 mile south), North Lee (1 mile north-west), Butler's Cross (1 mile south) and Ellesborough (1 mile south). Further out, we also cover Aylesbury (4 miles north-west), High Wycombe (10 miles south), Chesham (8 miles south-east), Marlow (13 miles south), Amersham (10 miles south-east) and Beaconsfield (12 miles south-east).
Local landmarks in Nash Lee
Our customers here include homes close to The Russell Arms, John Colet School and Church of St Peter and St Paul and the streets around them. The closest station to Nash Lee is Stoke Mandeville station, about 1.4 miles north. Other landmarks nearby include Little Kimble Motte (1.5 miles south-west) and National Paralympic Heritage Centre (2.5 miles north). The countryside around Nash Lee includes Coombe Hill and Brush Hill Local Nature Reserve.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
When we would advise against a repair
A repair is not right for every job, including:
- Rotten walls or floors behind the bath
- Gaps so wide they need filling or trims before sealing
- Loose tiles, which need refixing first
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
Nash Lee questions
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
It’s been repaired before. Can you still fix it?
Normally, yes. The old repair comes out first, so mention it when you send pictures.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Do you come to Nash Lee?
Yes. We cover the entire UK and travel to Nash Lee. Send us pictures for a fixed quote, or call 0345 017 0787.
Why does mould come back so fast?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Which areas do you work in?
We work UK-wide, so Nash Lee is covered. Our prices are the same everywhere.
What bath resealing costs
There are no hourly rates or hidden extras. The price is based on:
- What kind of damage it is
- The colour and finish to match
- What the surface is made of
- Whether old repairs or coatings need taking off
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Repairs by material
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
Trays are sealed with weight on them, for the same reason.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Keeping it looking good
So the finish stays in good condition:
- Reseal at the first sign of lifting
- Dry the seal after bathing
- Let steam out after showers
- Store bottles on a shelf
Let it cure fully before using the bath or shower, normally about a day.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
What we are called out for in Nash Lee
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning only removes the surface.
The most common problems we are called about are:
- Missing sealant behind the taps
- Damp near the bath
- Black mould in the sealant
- Sealant that is split or lifting
Before you book anyone
- What happens if the damage is worse than the pictures show
- How long it needs to cure
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
