Buckinghamshire · England
Bath Re-enamelling in Nash Lee
Bath re-enamelling in Nash Lee without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
About our bath re-enamelling in Nash Lee
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a coating lifting around the plughole and an original cast iron bath that needs restoring, on cast iron baths, basins & shower trays and pressed steel baths.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- Nash Lee (HP17)
- Area hub
- Buckinghamshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Some jobs are not right for a repair, including:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Problems we cannot see until an old finish comes off
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What we are called out for in Nash Lee
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
People usually call us after spotting one of these:
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- Wear marks under the taps
What your quote should include
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
- What aftercare is recommended
- Whether cleaning and preparation are in the price
Nash Lee and nearby
Nash Lee is about 4 miles south-east of Aylesbury, in Buckinghamshire. From the centre of Nash Lee to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Nash Lee is one of 263 towns and villages in Buckinghamshire where we work. You can also see our page for London, about 35 miles away.
Our visits in HP17 are booked in the same way as anywhere else. Close by, we cover Terrick (1 mile south), Chalkshire (1 mile south), North Lee (1 mile north-west), Butler's Cross (1 mile south) and Ellesborough (1 mile south). Larger places within reach include Aylesbury (4 miles north-west), High Wycombe (10 miles south), Chesham (8 miles south-east), Marlow (13 miles south), Amersham (10 miles south-east) and Beaconsfield (12 miles south-east).
Local landmarks in Nash Lee
Locally, our jobs take us to homes close to The Russell Arms, John Colet School and Church of St Peter and St Paul. The nearest railway station is Stoke Mandeville station, roughly 1.4 miles north. Well-known places in the area include Little Kimble Motte (1.5 miles south-west) and National Paralympic Heritage Centre (2.5 miles north). The countryside around Nash Lee includes Coombe Hill and Brush Hill Local Nature Reserve.
Nearby places to Nash Lee
Also in Nash Lee
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Nash Lee as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
- Let us know about parking or access
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price is based on:
- What kind of damage it is
- How hard the colour is to match
- Previous DIY repairs that have to come out
- How many items we do on one visit
Our prices are the same across the UK, so there is no premium for Nash Lee. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- A close-up of the damage, in focus
- The material, if you know it
- Whether it’s been repaired or coated before
- Where you are, by postcode
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Nash Lee: your questions answered
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Do you cover Nash Lee?
Yes, we do. Repair technicians travel to Nash Lee from across the region, and the price is the same as everywhere else.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Do not let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Do not leave a chip unrepaired
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
