Kent · England

Bath Resealing for Newland Green homes

We travel to Newland Green for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.

  • Discoloured, yellow sealant
  • Missing sealant behind the taps
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Newland Green

Bath resealing at your home in Newland Green

All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Typical jobs include black spots in the silicone and gaps in the seal, across baths, wet rooms and kitchen worktops & sinks.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.

Where
Newland Green (TN27)
Region
Kent
Cover
12 months on all our work
Price
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Aftercare tips

It’s all simple stuff:

  • Use the extractor fan
  • Dry the seal after bathing
  • Reseal when black spots won’t clean off
  • Air the room after use

Leave the sealant to cure for the time we give you, typically around 24 hours.

Black mould in sealant is not just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.

Prices and what affects them

A fixed quote means you know the cost before you book. We look at:

  • Unusual colours or finishes
  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it
  • What kind of damage it is

The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.

Getting a price from photos

Photographing the damage takes a minute. Try to send:

  • Any earlier repairs or coatings
  • A wider photo showing the whole bath or shower
  • A coin or ruler next to the damage for scale
  • Natural light rather than flash

For a price in Newland Green, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Newland Green questions

How long before I can shower?

Usually after around 24 hours. We confirm before we leave.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

What information do you need?

Use the quote form or ring 0345 017 0787.

Do you cover the whole of Kent?

Across the UK. Our prices are the same everywhere.

Why does the silicone keep cracking?

Movement is the usual cause. We seal baths full of water.

How long does resealing take?

Around two hours for a bath, plus curing time.

Do you cover Newland Green?

Yes, we do. We send a technician to Newland Green for every job, with no extra charge for travel.

Covering Newland Green

Newland Green is about 7 miles north-west of Ashford, in Kent. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We cover all 922 towns and villages across Kent, from the larger towns to small villages. We work right across the region, from Newland Green to London (41 miles away).

Our visits in TN27 are booked in the same way as anywhere else. We also travel to Mundy Bois (1 mile east), Egerton Forstal (1 mile north-west), Potter's Forstal (1 mile north-west), Egerton (1 mile north-east) and Pembles Cross (1 mile north-west). We also work in nearby towns such as Maidstone (10 miles north-west), Ashford (7 miles south-east), Sittingbourne (11 miles north), Faversham (12 miles north-east), Kings Hill (15 miles north-west) and Davington (12 miles north-east).

Local landmarks in Newland Green

Typical jobs here are in homes near Church of St James and Egerton Church of England Primary School and the streets around them. For rail, the closest station is Pluckley station, roughly 2.1 miles south-east. Other landmarks nearby include Coldbridge Castle (1.6 miles north-west).

Map of Newland Green © OpenStreetMap contributors

For landlords and businesses

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

When to call us in Newland Green

Even good sealant eventually discolours. Steam, soap and movement all wear it down.

Clients usually contact us about:

  • Black spots in the silicone
  • Sealant that is split or lifting
  • A messy previous reseal
  • Gaps by the taps

Before you book anyone

  • Is the price fixed, and does it include VAT?
  • How soon you can use it again
  • What protection goes down before work starts
  • Whether they match the colour on site

Our hiring checklist

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • Loose tiles, which need refixing first
  • Gaps too big for silicone alone
  • A flexing bath

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms
  • Baths
  • Shower trays & enclosures

How it works

Arrival times are agreed in advance, so you’re not left guessing. Once we’re there, the work takes a couple of hours for most jobs. The room is left tidy and you’ll know when it can be used.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

Before we arrive

  • Tell us about parking, stairs or access
  • Ensure the area is dry
  • Have somewhere for us to park nearby if possible

Get a quote

The quickest way to a price is to send two or three pictures through our quote form or call us. We will say immediately if a repair is the right fix.

Get a fixed quote

Advice

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

We fill the bath before sealing, to open the joint fully.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.