Pembrokeshire · Wales
Bath & shower resealing (mastic) in Nolton and Roch, Pembrokeshire
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Nolton and Roch and across Pembrokeshire. Free, fixed quotes from your photos.
- Old sealant that looks dirty
- Black spots in the silicone
- Water getting behind the bath or tray
What we cannot put right
A few problems are outside what a surface repair can do:
- A flexing bath
- Tiles that move, until they’re refixed
- Gaps so wide they need filling or trims before sealing
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Basins & vanity units
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
- Wet rooms
About our bath resealing in Nolton and Roch
A fresh seal protects your bathroom. Failed sealant lets water get where it shouldn’t, and resealing puts a stop to that. If you are dealing with damp near the bath and discoloured, yellow sealant, we can help.
All our work comes with our one-year guarantee.
- Location
- Nolton and Roch (SA62)
- Area hub
- Pembrokeshire
- Cover
- A year, on every repair
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath resealing in Nolton and Roch
Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.
If you can see any of these, send us a photo:
- Unsealed corners
- Sealant that’s split or lifting
- Old sealant that looks dirty
- Mould you can’t clean out
Comparing quotes
- What aftercare is recommended
- Whether the colour is mixed to match
- How your room will be protected
- When it can be used again
Covering Nolton and Roch
Nolton and Roch is about 5 miles west of Haverfordwest, in Pembrokeshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Nolton and Roch is one of 223 towns and villages in Pembrokeshire we cover.
Jobs in SA62 are booked in the same way as anywhere else. From West Lane, Welsh Road and Meadow Lane or a nearby road, we can come to you. Other places close to Nolton and Roch include Nolton (1 mile north-west), Simpson Cross (2 miles north-east), Roch (2 miles north), Keeston (2 miles east) and Lambston (3 miles east). Further out, we also cover Haverfordwest (5 miles east), Milford Haven (8 miles south), Pembroke (13 miles south-east), Pembroke Dock (11 miles south-east), The Marsh (6 miles east) and Fishguard (13 miles north-east).
Local landmarks in Nolton and Roch
Around Nolton and Roch, we work in homes near The Mariners Inn and Church of St Madoc and the streets around them. Other landmarks nearby include Withybush General Hospital (5.6 miles east) and Roch Castle (2.1 miles north). Green spaces nearby include Rogeston Mount.
Places near Nolton and Roch
More services for Nolton and Roch
How we price bath resealing
We charge the same across the UK, including Nolton and Roch. The price reflects:
- The colour and finish to match
- Any earlier repairs that need removing first
- How much damage there is
- How many items we do on one visit
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Send pictures for a quote
Before you send photos, these tips help us give you a firm price:
- A wider photo showing the entire bath or shower
- Details of any past repairs
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed quote the same day in most cases.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Nolton and Roch: your questions answered
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Why does my sealant keep going mouldy?
Damp is the cause. Ventilation and drying keep it clean longer.
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long will it take?
A bath or shower normally takes a couple of hours. Leave it to cure before use.
How long does silicone take to cure?
We will give you the curing time, normally around a day.
My seal keeps tearing. Why?
Something is moving. Persistent splitting can mean the support needs attention.
Looking after it afterwards
To keep it looking its best for years:
- Let steam out after showers
- Run the extractor fan during and after showers
- Keep bottles off the joints
- Replace the seal when mould sets in
Leave the sealant to cure for the time we give you, normally around 24 hours.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we will say if you need a builder or plumber.
Landlord and trade work in Nolton and Roch
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What your bath or shower is made of matters
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
Trays are sealed with weight on them, for the same reason.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a couple of hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
