Greater London · England

Bath Resealing for North Sheen homes

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in North Sheen and across Greater London. Free, fixed quotes from your pictures.

  • Silicone coming away from the tiles
  • An untidy old seal
  • Gaps by the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for North Sheen homes

Work for landlords and builders

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.

Bath resealing in North Sheen, done in place

We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. We’re often asked to fix silicone smeared on tiles and water getting behind the bath or tray, across wet rooms, baths and basins & vanity units.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Roll-top bath being refinished by a Surface Doctor technician
Where
North Sheen (TW9, SW14, W4)
Region
Greater London
Guarantee
12 months on all our work
Price
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Run the extractor fan during and after showers
  • Clean the sealant gently and regularly
  • Let steam out after showers
  • Don’t stand toiletries on the seal

Don’t scrape the sealant with anything sharp, and do not stand bottles on the seal.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

When a repair is not the answer

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Movement in the bath or tray
  • Hollow or loose tiles
  • Water damage behind the bath that needs a builder

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Baths
  • Basins & vanity units
  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures

When to call us in North Sheen

Sealant doesn’t last forever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.

The things customers typically mention when they call include:

  • Old sealant that looks dirty
  • Silicone smeared on tiles
  • Black mould in the sealant
  • Silicone coming away from the tiles

Questions to ask before booking

  • How the colour is matched
  • How soon you can use it again
  • Aftercare advice
  • How changes to the job are handled

Our hiring checklist

North Sheen questions

Is it safe with children and pets around?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

How do I get a price for bath resealing in North Sheen?

The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How do I stop mould in sealant?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

What do you need from me?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Why does my sealant keep splitting?

The bath or tray is probably flexing. If it keeps happening, the support may need fixing.

What areas do you cover?

We work UK-wide. Prices do not change with location.

Covering North Sheen

North Sheen is about 3 miles south of Acton, in Greater London. Clients in North Sheen get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We work in 764 places in Greater London, from the larger towns to small villages. Our jobs stretch from North Sheen to London (about 8 miles away).

Jobs in TW9, SW14 and W4 are booked in the same way as anywhere else. From Kent Road, Ibis Lane and The Avenue or anywhere nearby, a technician can come to you. Nearby, we also work in Kew (1 mile north), Grove Park (1 mile north-east), Strand-on-the-Green (1 mile north), East Sheen (1 mile south-east) and Mortlake (1 mile south-east). Further out, we also cover London (8 miles east), City of Westminster (6 miles north-east), Marylebone (6 miles north-east), Kensington (4 miles north-east), St Pancras (8 miles north-east) and Shoreditch (9 miles east).

What’s near North Sheen

In North Sheen, that means homes near Chiswick School, The Barn Church and Kew Riverside Primary School, among other places. Also close by are Kew College Prep (0.5 miles north-west), Tap on the Line (under half a mile north-west) and Dukes Meadows (0.7 miles east). There is a railway station in North Sheen itself: Kew Gardens station. Well-known places in the area include Museum No. 2. Monocotyledons and Cryptogams (0.9 miles north-west) and Livat Hammersmith (2.5 miles north-east). Not far away are Kew Gardens Lake and Duke's Hollow.

  • Local facilities include Municipal Borough of Acton (2.2 miles north)
Map of North Sheen © OpenStreetMap contributors

What we do, step by step

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes around two hours. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Getting ready for the visit

  • Clear the area around the damage
  • Point us to the nearest place to park
  • Let us know which floor the room is on

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Get a free quote

Related advice

Materials and what they mean for the repair

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

What affects the price in North Sheen

We charge the same across the UK, including North Sheen. What changes the price is:

  • Access to the area
  • Doing more than one item at once
  • Unusual colours or finishes
  • What the surface is made of

Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Quotes from your photos

Before you send photos, these tips help us give you a firm price:

  • A picture taken from further back
  • The material, if you know it
  • A close-up of the damage, in focus
  • Something in shot to show the size

Send us photos of the damage and one of the whole item, with your TW9 postcode, and we will reply with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.