Greater London · England
Bath Resealing in Mortlake
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Mortlake. Send photos for a free, fixed quote.
- Discoloured, yellow sealant
- Mould you can’t clean out
- Gaps by the taps
What bath resealing costs
Every quote is fixed and free. What we look at:
- How easy the damage is to reach
- The material and finish
- Whether we combine several jobs
- The type of damage
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- One picture of the entire bath or shower
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job the same day in most cases.
Bath resealing at your home in Mortlake
A proper reseal starts with removing every trace of the old silicone. New silicone will not bond to old, which is why many DIY jobs peel. Whether it’s silicone coming away from the tiles and discoloured, yellow sealant, we can usually put it right.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Mortlake (SW14, SW13, SW15)
- County
- Greater London
- Cover
- One year on every repair
- Price
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
Baths are resealed with water in them, to open the joint fully.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes about two hours for a bath. If we find something your photos didn’t show, we’ll explain it before carrying on.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We make sure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Preparing for the visit
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Ensure the area is dry
Get a quote
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll say right away if a repair is the right fix.
Advice
Questions from Mortlake
Why does mould come back so fast?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
How long does a reseal take?
Most reseals take about two hours. It then needs time to cure.
How long does silicone take to cure?
You’ll get the curing time from us.
How do I get a price for bath resealing in Mortlake?
Because every job differs, we price from photos. You will get a fixed figure before you book.
Are there extra charges for Mortlake?
We don’t add a call-out fee. Your fixed price includes everything.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Why does my sealant keep splitting?
Something is moving. If it keeps happening, the support may need fixing.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Why it’s worth resealing in Mortlake
Putting new silicone over old does not last. It peels within weeks, and traps mould underneath. We remove the old sealant completely. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Straight answers about what a repair can do
- One visit for most repairs
- Same prices wherever you are
- We leave the room as we found it
Read our full price list.
Towns and villages near Mortlake
Other services in Mortlake
What we’re called out for in Mortlake
Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.
Typical reasons for a call-out include:
- Silicone coming away from the tiles
- Unsealed corners
- A messy previous reseal
- Black mould in the sealant
What to look for in a quote
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- How the colour is matched
Mortlake and nearby
Mortlake is about 3 miles west of Fulham, in Greater London. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Mortlake is one of 764 towns and villages in Greater London where we work. Our jobs stretch from Mortlake to London (about 8 miles away).
Our visits in SW14, SW13 and SW15 work the same way as everywhere else we cover. From Elm Road, Well Lane and Coval Road or a nearby road, a technician can come to you. Being close to the A3003, Mortlake is simple for us to get to. We also cover the places around Mortlake: East Sheen (1 mile south-west), North Sheen (1 mile north-west), Barnes (1 mile north-east), Grove Park (1 mile north) and Roehampton (1 mile south-east). We also work in nearby towns such as London (8 miles east), City of Westminster (6 miles north-east), Marylebone (6 miles north-east), Kensington (4 miles north-east), St Pancras (8 miles north-east) and Shoreditch (9 miles north-east).
Local landmarks in Mortlake
Locally, our jobs take us to homes close to Hare and Hounds pub, Thomson House School and Ibstock Place School and the streets around them. You’ll also find All Saints' Church (under half a mile south-east), Richmond Park Academy (within half a mile south-east) and Palewell Park (0.5 miles south). There’s a railway station in Mortlake itself: Mortlake station. Well-known places in the area include Barnes Hospital (under half a mile east) and Ubuntu Museum: African Museum of Humanity (1.1 miles south-east). Not far away are Richmond Hill and Kew Gardens Lake.
- Other local spots include Municipal Borough of Acton (2.8 miles north)
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Keep bottles off the joints
- Replace the seal when mould sets in
- Run the extractor fan during and after showers
- Let steam out after showers
Avoid scraping the joints, and keep shampoo bottles off the joints.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
When we would advise against a repair
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Water damage behind the bath that needs a builder
- A flexing bath
- Gaps so wide they need filling or trims before sealing
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
About our accreditations · Every repair comes with a one-year guarantee.
