Surrey · England
Bath & shower resealing (mastic) in Old Malden, Surrey
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Old Malden and across Surrey. Free, fixed quotes from your pictures.
- Silicone smeared on tiles
- Mould you can’t clean out
- Leaks at the edges
About our bath resealing in Old Malden
A fresh seal protects your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. We regularly repair wet rooms, kitchen worktops & sinks and baths, and the jobs we see most are old sealant that looks dirty and black mould in the sealant.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Old Malden (KT19, KT4, KT5)
- Region
- Surrey
- Warranty
- 12 months on all our work
- Price
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
To be straight with you, some problems need a different fix:
- Hollow or loose tiles
- Gaps too big for silicone alone
- A flexing bath
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Baths
- Wet rooms
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
Landlords, agents and businesses in Old Malden
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
FAQs for Old Malden
What does bath resealing cost?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How long does resealing take?
Generally a couple of hours, plus curing time.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Which areas do you work in?
The entire UK, including all of Surrey. Send your postcode with your pictures and we will offer you dates.
Where we work around Old Malden
Old Malden is about 2 miles north-west of Ewell, in Surrey. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Our technicians cover all 395 towns and villages in Surrey. Our nearest city page is London, about 11 miles away.
Our visits in KT19, KT4 and KT5 work the same way as everywhere else we cover. Local streets include Curtis Road, Rowden Road and Grafton Road, all of which we cover. Other places close to Old Malden include Worcester Park (1 mile east), Tolworth (1 mile north-west), Stoneleigh (1 mile south-east), Berrylands (1 mile north-west) and Chessington (2 miles south-west). Further out, we also cover Woking (14 miles west), Epsom (3 miles south), Horley (14 miles south), Redhill (10 miles south-east), Egham (13 miles west) and Reigate (10 miles south).
Near you in Old Malden
Typical jobs here are in homes near Hogsmill LNR, Knollmead Primary School and Richard Challoner School and the streets around them. You’ll also find Parish Church of St Mary the Virgin (0.6 miles east) and The Plough Inn Public House (1 mile north-east). The closest station to Old Malden is Tolworth station, about 0.5 miles west. Further afield, we also cover the area around Municipal Borough of Surbiton (1.2 miles west) and Bentall Centre (3 miles north-west). The countryside around Old Malden includes The Lake and Kingston Hill Road area.
Places near Old Malden
What else we do in Old Malden
Different materials, different repairs
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take about two hours for a bath. We tidy up before we leave and tell you when it’s ready to use.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Let the surface dry out before the visit
- Let us know about parking or access
- Keep children and pets away from the room on the day
Get a quote
If you’re in Old Malden and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Prices and what affects them
You won’t pay by the hour. The price is based on:
- Any earlier repairs that need removing first
- How many areas need work
- Where the damage is and how we get to it
- The colour and finish to match
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Most quotes are done from photos alone. To help us price it:
- The postcode, so we can plan the visit
- Something in shot to show the size
- The material, if you know it
- A close-up of the damage, in focus
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
When to call us in Old Malden
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.
Look out for these signs:
- Gaps in the seal
- Leaks at the edges
- Silicone smeared on tiles
- Stained silicone
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How your room will be protected
- What happens if the damage is worse than the pictures show
- If travel is included in the price
Looking after it afterwards
Aftercare is simple:
- Clean the sealant gently and regularly
- Run the extractor fan during and after showers
- Keep the joints dry
- Reseal at the first sign of lifting
Do not scrape the sealant with anything sharp, and do not stand bottles on the seal.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
