Telford and Wrekin · England
Bath Resealing for Old Park homes
Our repair technicians come to Old Park for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Damp near the bath
- Black spots in the silicone
- Silicone smeared on tiles
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Hollow or loose tiles
- Movement in the bath or tray
- Gaps so wide they need filling or trims before sealing
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
Bath resealing in Old Park without replacing anything
A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, as one neat, continuous bead. Typical jobs include sealant that’s split or lifting and black mould in the sealant, in kitchen worktops & sinks, baths and basins & vanity units.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Old Park (TF3, TF2, TF4)
- County
- Telford and Wrekin
- Warranty
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Don’t stand toiletries on the seal
- Clean the sealant gently and regularly
- Open a window after bathing
- Wipe the joints dry after use
Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.
Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.
Why reseal now?
Resealing costs very little. Failed sealant can lead to water damage that is much more expensive. We charge the same wherever you are, with no extra for Old Park. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- We will tell you if it’s not worth repairing
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- Nothing taken out or refitted
See our full price list.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Landlord and trade work in Old Park
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams in Telford and Wrekin and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Prices and what affects them
We give every job a fixed price from photos. These are the things that affect it:
- The material
- Access to the area
- How many items we do on one visit
- The size and number of damaged areas
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- Your postcode, so we can check dates
- A picture taken from further back
To get a price, send two or three pictures using our quote form or call us. We will tell you honestly whether it can be repaired.
What we’re called out for in Old Park
In time, even good sealant discolours. Steam, soap and movement all take their toll.
Look out for these signs:
- Mould you cannot clean out
- Missing sealant behind the taps
- Stained silicone
- Leaks at the edges
Before booking anyone
- Who turns up on the day
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
- What protection goes down before work starts
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a couple of hours, and you are welcome to carry on with your day while we work.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Preparing for the visit
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
How to get a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
FAQs for Old Park
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
My seal keeps tearing. Why?
Generally because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Why does my sealant keep going mouldy?
Normally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Also in Old Park
Covering Old Park
Old Park is about 1 mile south-east of Telford, in Telford and Wrekin. Across the TF3 area, we come to you. We cover all 79 towns and villages across Telford and Wrekin. Our nearest city page is Birmingham, about 28 miles away.
Here we cover the TF3, TF2 and TF4 postcode area. Streets in the area include Park Lane, West Road and Main Road. With the M54 and A442 close by, Old Park is simple for us to get to. If you’re just outside Old Park, we cover Telford (1 mile north-west), The Rock (1 mile south-west), Newdale (1 mile west), Malinslee (1 mile south) and Oakengates (1 mile north). Within a short drive, we also cover Wellington (3 miles north-west), Newport (7 miles north-east), Dothill (4 miles north-west), Sutton Hill (4 miles south), Shawbirch (4 miles north-west) and Woodside (3 miles south).
Near you in Old Park
Locally, our jobs take us to homes close to Holy Trinity Church, The Telford Priory School and Queenswood Primary School and Nursery. Also close by are Telford Town Park (0.9 miles south-east) and Pear Tree Bridge Inn (0.6 miles north). The nearest railway station is Telford Central station, roughly 0.7 miles east of the centre. A little further out are Museum of The Post Office In The Community (3.8 miles south) and Telford Shopping Centre (0.6 miles south-east). Green spaces nearby include The Ercall.
About our accreditations · Every repair comes with a one-year guarantee.
