Aberdeenshire · Scotland

Bath Resealing in Oldmeldrum

Bath resealing in Oldmeldrum without the cost of replacing. Send us pictures for a fixed price, then we come to you.

  • Gaps in the seal
  • Mould you can’t clean out
  • Old sealant that looks dirty
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Oldmeldrum

Aftercare tips

Nothing complicated is needed, just a few sensible habits:

  • Dry the seal after bathing
  • Replace the seal when mould sets in
  • Do not stand toiletries on the seal
  • Clean the sealant gently and regularly

Let it cure fully before using the bath or shower, normally around 24 hours.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Bath resealing in Oldmeldrum, done in place

A fresh seal protects your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and resealing puts a stop to that. Typical jobs include unsealed corners and discoloured, yellow sealant, across basins & vanity units, wet rooms and kitchen worktops & sinks.

You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.

Location
Oldmeldrum (AB51)
Region
Aberdeenshire
Warranty
12 months on all our work
Quote
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What bath resealing costs

We price every job individually. What matters most is:

  • How many items we do on one visit
  • Any earlier repairs that need removing first
  • Where the damage is and how we get to it
  • How hard the colour is to match

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Getting a price from pictures

The better the photos, the more accurate the price. Here’s what helps:

  • Natural light rather than flash
  • Details of any past repairs
  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them over. What comes back is a fixed price, not a guess.

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Baths

Baths are resealed with water in them, to open the joint fully.

For landlords and businesses

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

For anyone letting property in or around Oldmeldrum, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.

Do you need bath resealing in Oldmeldrum?

In time, even good sealant discolours. Steam, soap and movement all wear it down.

People typically call us when they notice one of these:

  • Silicone smeared on tiles
  • Silicone coming away from the tiles
  • Black mould in the sealant
  • Water getting behind the bath or tray

Before you book anyone

  • Whether the colour is mixed to match
  • How long the guarantee is and what it covers
  • What prep work is covered
  • What happens if they find more damage

Choosing a repair company

Why reseal now?

Putting new silicone over old does not last. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why choose Surface Doctor in Oldmeldrum

  • CHAS, Constructionline and SafeContractor accredited
  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • Fixed prices from your photos

Read our pricing.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

The process

Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow a couple of hours.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We ensure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Preparing for the visit

  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on
  • Ensure the room can be ventilated

How to get a price

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Advice

Oldmeldrum: your questions answered

How long does a reseal take?

A bath or shower usually takes a couple of hours. It then needs time to cure.

What happens if you find more damage?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

How long does silicone take to cure?

We will give you the curing time, usually around a day.

Can you reseal over the old silicone?

Never over old. The old sealant is cut out and the joint cleaned and dried.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

Is repairing better than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Can you do more than one item on the same visit?

Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.

How do I stop mould in sealant?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Oldmeldrum and nearby

Oldmeldrum is about 4 miles north-east of Inverurie, in Aberdeenshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 161 places across Aberdeenshire, from the larger towns to small villages.

Our visits in AB51 are booked in the same way as anywhere else. From Station Road, Cowgate and Lower Cowgate or a nearby road, a technician can come to you. Oldmeldrum is on the A920 and A947, so it’s easy for us to reach. We also cover the places around Oldmeldrum: Hattoncrook (3 miles south-east), Inverurie (4 miles south-west), Garioch (4 miles south-west), Daviot (4 miles west) and Tarves (4 miles north-east). We also work in nearby towns such as Westhill (13 miles south), Ellon (9 miles east), Turriff (15 miles north), Kemnay (8 miles south-west), Kintore (7 miles south) and Insch (11 miles west). Remote and island addresses take a little more planning, so call us to arrange it.

What’s near Oldmeldrum

Locally, our jobs take us to homes close to Meldrum Arms Hotel, Meldrum Academy and Oldmeldrum. The closest station to Oldmeldrum is Inverurie station, roughly 4 miles south-west of the centre. Other landmarks nearby include House Of Daviot Hospital (4.1 miles west) and Mounie Castle (2.7 miles west).

Map of Oldmeldrum © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.