Telford and Wrekin · England

Bath & shower resealing (mastic) in Osbaston, Telford and Wrekin

Bath resealing in and around Osbaston: photo quotes, tidy work and a year’s guarantee.

  • A messy previous reseal
  • Sealant that is split or lifting
  • Black spots in the silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Osbaston

Osbaston and the surrounding area

Osbaston is about 6 miles north-west of Wellington, in Telford and Wrekin. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Osbaston is one of 79 places in Telford and Wrekin where we work. Our jobs stretch from Osbaston to Birmingham (36 miles away).

Our visits in TF6 work the same way as everywhere else we cover. We also cover the places around Osbaston: Cotwall (1 mile south-east), Crudgington (2 miles east), Longdon on Tern (2 miles south-east), Heath Lanes (2 miles north-east) and Waters Upton (2 miles east). Within a short drive, we also cover Telford (8 miles south-east), Wellington (6 miles south-east), Dawley (9 miles south-east), Oakengates (8 miles south-east), Newport (9 miles east) and The Rock (8 miles south-east).

Near you in Osbaston

Around Osbaston, we work in homes near High Ercall Primary School and St Michael's Church, among other places. A little further out are Princess Royal Hospital (5.1 miles south-east) and Moreton Corbet Castle (3.6 miles north-west). The countryside around Osbaston includes Haughmond Hill.

Map of Osbaston © OpenStreetMap contributors

Bath resealing at your home in Osbaston

A fresh seal protects your bathroom. Failed sealant lets water get where it shouldn’t, and resealing puts a stop to that. Whether it’s stained silicone and leaks at the edges, we can generally put it right, whatever the material.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.

Where
Osbaston (TF6)
Area hub
Telford and Wrekin
Cover
12 months on all our work
Quotes
Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Different materials, different repairs

Shower trays

Trays are sealed with weight on them, for the same reason.

Baths

Baths are resealed with water in them, so the joint is at its widest.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Clean the joints with a mild cleaner
  • Wipe the joints dry after use
  • Run the extractor fan during and after showers
  • Do not stand toiletries on the seal

Leave the sealant to cure for the time we give you, generally around 24 hours.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Work for landlords and builders

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.

Why it’s worth resealing in Osbaston

Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

What you get with us

  • Dust sheets down, tidy finish
  • Honest advice, even when it means no job
  • One price list for the whole UK
  • Normally one visit, start to finish

Read our full price list.

What we do, step by step

We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take around two hours, and we leave the room as we found it.

  1. The surrounding area is protected and the joints masked.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Tell us about parking, stairs or access
  • Point us to the nearest place to park

Get a quote

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

Get a fixed quote

Related advice

What a repair cannot fix

Honesty matters more than a booking, so here’s what a repair will not do:

  • Loose tiles, which need refixing first
  • Rotten walls or floors behind the bath
  • Gaps so wide they need filling or trims before sealing

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we work on in Osbaston

  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures
  • Baths

Do you need bath resealing in Osbaston?

Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.

If you can see any of these, send us a picture:

  • Gaps by the taps
  • A messy previous reseal
  • Mould you can’t clean out
  • Sealant that’s split or lifting

Questions to ask before booking

  • Who turns up on the day
  • How long it needs to cure
  • What prep work is covered
  • Whether the colour is mixed to match

10 questions to ask before you book

Common questions in Osbaston

Why does mould come back so fast?

Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

What areas do you cover?

We work UK-wide. Prices don’t change with location.

Is there a call-out fee?

There is no separate call-out charge. The fixed price covers the visit and the work.

I’m a tenant. Can you help?

We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Telford and Wrekin.

How do I book?

Just pictures, your postcode and a contact number. On the day, access to the room.

Can I add another job to the visit?

Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.