Telford and Wrekin · England

Bath Resealing in Heath Lanes

Bath resealing in Heath Lanes without the cost of replacing. Get a fixed quote from your pictures, then we come to you.

  • Gaps by the taps
  • Silicone smeared on tiles
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Heath Lanes homes

Bath resealing in Heath Lanes without replacing anything

Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Common call-outs are for stained silicone and leaks at the edges, on baths, shower trays & enclosures and basins & vanity units.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Area
Heath Lanes (TF6)
County
Telford and Wrekin
Warranty
A year, on every repair
Quote
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Hidden water damage
  • A flexing bath
  • Very wide gaps that need a trim

If in doubt, send pictures and we will say what we think before you book.

Materials we repair

  • Basins & vanity units
  • Shower trays & enclosures
  • Wet rooms
  • Baths
  • Kitchen worktops & sinks

Where we work around Heath Lanes

Heath Lanes is about 8 miles north-west of Telford, in Telford and Wrekin. We visit clients in Heath Lanes and the surrounding area, so you do not need to take anything anywhere. Heath Lanes is one of 79 towns and villages in Telford and Wrekin we cover. Our jobs stretch from Heath Lanes to Birmingham (about 36 miles away).

We cover every part of the TF6 postcode area and the streets around it. We also cover the places around Heath Lanes: Cold Hatton (1 mile east), Ellerdine Heath (1 mile north), Cold Hatton Heath (1 mile east), Waters Upton (1 mile south-east) and Crudgington (2 miles south). Within a short drive, we also cover Telford (8 miles south-east), Wellington (6 miles south), Dawley (9 miles south-east), Oakengates (8 miles south-east), Newport (8 miles east) and The Rock (8 miles south-east).

What’s near Heath Lanes

Our clients here include homes close to The Seven Stars Inn and All Hallows and the streets around them. Well-known places in the area include Princess Royal Hospital (5.6 miles south-east) and Moreton Corbet Castle (3.8 miles west).

Map of Heath Lanes © OpenStreetMap contributors

Keeping it looking good

How the surface is treated afterwards matters:

  • Give the seal a regular clean
  • Reseal at the first sign of lifting
  • Keep the joints dry
  • Don’t stand toiletries on the seal

Don’t scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Black mould in sealant isn’t just unsightly; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Your questions about bath resealing in Heath Lanes

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.

How much does bath resealing cost in Heath Lanes?

Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item and your postcode.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Why does my sealant keep going mouldy?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Can new silicone go over old?

Never over old. It’s removed, cleaned off and the joint dried first.

Can I get a quote without a visit?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

Will the price change on the day?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

How long will it take?

Most reseals take about two hours. It then needs time to cure.

Repairs by material

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Baths

Baths are resealed with water in them, so the joint is at its widest.

How it works

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take around two hours, including clearing up.

  1. All the old sealant is cut out and removed.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

Preparing for the visit

  • Mention any parking restrictions or tricky access
  • Tell us about any previous repairs or coatings
  • Let the surface dry out before the visit

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Send photos for a quote

Advice

Resealing in Heath Lanes: why it matters

Resealing costs very little and protects the walls and floor. Failed sealant can lead to water damage that is much more expensive. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • No extra charge for your area
  • Free fixed quotes from pictures
  • We come to you, anywhere in the UK

Take a look at our pricing.

What bath resealing costs

A fixed quote means you know the cost before booking. We look at:

  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • The material and finish
  • How many items we do on one visit

The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A clear, close picture of the problem area
  • Your postcode, so we can check dates
  • Daylight if possible, and no flash reflection
  • One picture of the whole bath or shower

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.