Poole · England
Bath Resealing in Parkstone
Bath resealing in Parkstone without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Old sealant that looks dirty
- An untidy old seal
- Black spots in the silicone
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Bath resealing at your home in Parkstone
Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. Typical jobs include old sealant that looks dirty and silicone coming away from the tiles, in basins & vanity units, shower trays & enclosures and kitchen worktops & sinks.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Location
- Parkstone (BH14)
- Area hub
- Poole
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Parkstone and the surrounding area
Parkstone is about 2 miles south of Poole, in Poole. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Parkstone is one of 18 places in Poole where we work.
Here we cover the BH14 postcode area. You’ll find streets such as Turks Lane, Elgin Road and Lagoon Road, all of which we cover. We also cover the places around Parkstone: Whitecliff (1 mile north), Canford Cliffs (1 mile south-east), Penn Hill (1 mile north-east), Longfleet (1 mile north-west) and Sea View (1 mile north). We also work in nearby towns such as Alder Hills (3 miles north-east), Canford Heath (3 miles north), Waterloo (3 miles north-west) and Talbot Woods (3 miles north-east).
Around Parkstone
Locally, our jobs take us to homes close to Poole High School, Lilliput Church of England Infant School and Poole Park. You’ll also find Holy Angels (0.5 miles east) and Uplands School (0.8 miles north-east). For rail, the closest station is Parkstone (Dorset) station, about 0.9 miles north of the centre. Further afield, we also cover the area around Big Four Railway Museum & Model Centre (3.3 miles east) and St Ann's Hospital (1.2 miles south-east). Open spaces near Parkstone include Beacon Hill and Ham Common (LNR).
- Parks and local facilities nearby include Poole (1.5 miles west)
Why it’s worth resealing in Parkstone
Sealing over old silicone is a false economy. It peels within weeks, and traps mould underneath. A proper reseal removes the old first. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
What you get with us
- Free fixed quotes from pictures
- We will tell you if it’s not worth repairing
- Work done at your home or business
- We leave the room as we found it
Read our pricing.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Give the seal a regular clean
- Replace the seal when mould sets in
- Keep the joints dry
- Ventilate the bathroom well
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
The process
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a couple of hours, and we leave the room as we found it.
- The surrounding area is protected and the joints masked.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
Getting ready for the visit
- Let the surface dry out before the visit
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
Getting a price
Email us a picture of the damage and one of the entire item, and tell us you are in Parkstone, and we will reply with a fixed price.
Read more
When a repair is not the answer
A repair isn’t right for every job, including:
- Loose tiles, which need refixing first
- A flexing bath
- Rotten walls or floors behind the bath
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Shower trays & enclosures
- Baths
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
Places near Parkstone
What else we do in Parkstone
Signs you need bath resealing in Parkstone
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.
Most people contact us when they notice something like this:
- An untidy old seal
- Black spots in the silicone
- Silicone coming away from the tiles
- Gaps by the taps
Questions to ask before booking
- The length of the guarantee and what it covers
- How soon you can use it again
- What aftercare is recommended
- What protection goes down before work starts
Questions from Parkstone
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before and we will plan for it.
Can you quote from pictures?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
What areas do you cover?
All of Poole, and the rest of the UK. Travel is included in the price.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Can you reseal over the old silicone?
Never over old. The old sealant is cut out and the joint cleaned and dried.
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
We fill the bath before sealing, to open the joint fully.
Prices and what affects them
Prices are worked out job by job, from your pictures. What matters most is:
- How much damage there is
- The type of damage
- The material and finish
- Doing more than one item at once
A repair is priced on what needs doing, not your postcode. You will see the full price before booking.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- A wider photo showing the entire bath or shower
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Something in shot to show the size
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
