Kent · England

Bath & shower resealing (mastic) in Pegwell, Kent

Bath resealing across Pegwell and nearby, done in a single visit in most cases and guaranteed for a year.

  • Unsealed corners
  • An untidy old seal
  • Sealant that is split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Pegwell homes

Where we work around Pegwell

Pegwell is about 1 mile south-west of St Lawrence, in Kent. Whether you’re in the middle of Pegwell or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Pegwell is one of 922 places in Kent where we work. Our jobs stretch from Pegwell to London (65 miles away).

All of CT11 and CT12 is within our area, from the main roads to the quietest streets. That includes homes on Saxon Road, Downs Road and London Road. Being close to the A299, Pegwell is easy for our repair technicians to reach. Nearby, we also work in Chilton (1 mile north), Cliffs End (1 mile west), Newington (1 mile north), Manston (2 miles north-west) and Haine (2 miles north). Within a short drive, we also cover Canterbury (14 miles west), Margate (4 miles north), Dover (14 miles south), Broadstairs (3 miles north-east), Deal (8 miles south) and Herne Bay (12 miles west).

Around Pegwell

Around Pegwell, we work in homes near Chatham House Grammar School, Sandwich and Pegwell Bay and Chilton Primary School and the streets around them. Nearby too are The Belle Vue pub (under half a mile west), Churchill House School With Railed Area (0.9 miles east) and Church of St Laurence (0.8 miles north-east). The closest station to Pegwell is Ramsgate station, about 1.1 miles north-east of the centre. Well-known places in the area include Ramsgate General Hospital (0.8 miles east) and Westwood Cross (2.2 miles north). Green spaces nearby include Sandwich and Pegwell Bay.

Map of Pegwell © OpenStreetMap contributors

About our bath resealing in Pegwell

We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours, plus curing time. Our repair technicians work on baths, shower trays & enclosures and kitchen worktops & sinks, and people most frequently call us about black mould in the sealant and gaps by the taps.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.

Area
Pegwell (CT11, CT12)
Region
Kent
Guarantee
12 months on all our work
Price
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Why it’s worth resealing in Pegwell

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

What you get with us

  • Straight answers about what a repair can do
  • Generally one visit, start to finish
  • CHAS, Constructionline and SafeContractor accredited
  • Every repair guaranteed for a year

See our full price list.

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Shower trays

We put weight on a tray before sealing it, for the same reason.

Pegwell: your questions answered

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Will the price change on the day?

Your quote covers the damage in the pictures. If there is more, we will tell you before starting.

How much does bath resealing cost in Pegwell?

Because every job differs, we price from pictures. You will get a fixed figure before booking.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

Prices and what affects them

We price every job individually. The main factors are:

  • How hard the colour is to match
  • What kind of damage it is
  • How much damage there is
  • The material and finish

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Send pictures for a quote

Good pictures mean an accurate price. Here’s what helps:

  • A photo taken from further back
  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area
  • Natural light rather than flash

The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say right away if a repair is the right fix.

When to call us in Pegwell

Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.

Common reasons people in Pegwell contact us include:

  • Discoloured, yellow sealant
  • A messy previous reseal
  • Silicone coming away from the tiles
  • Damp near the bath

What to look for in a quote

  • How to look after the finish
  • What prep work is covered
  • How your room will be protected
  • When it can be used again

Choosing a repair company

What we do, step by step

Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take a couple of hours, and we leave the room as we found it.

  1. First we strip out every bit of the old mastic.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

How to prepare

  • Point us to the nearest place to park
  • Open a window if you can
  • Mention any parking restrictions or tricky access

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You will get a fixed price, not an estimate.

Get a fixed quote

Read more

Landlord and trade work in Pegwell

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Aftercare tips

To keep it looking its best:

  • Clean the joints with a mild cleaner
  • Let steam out after showers
  • Replace the seal when mould sets in
  • Dry the seal after bathing

Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Black mould in sealant isn’t just unsightly. Resealing early keeps water out of the walls and floor.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.