Lincolnshire · England
Bath Resealing in Pilsgate
Fixed-price bath resealing in Pilsgate and the surrounding area, generally in one visit.
- Leaks at the edges
- Mould you cannot clean out
- Stained silicone
Bath resealing at your home in Pilsgate
Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours, then it needs to cure. We work on basins & vanity units, kitchen worktops & sinks and shower trays & enclosures, and the jobs we see most are leaks at the edges and silicone coming away from the tiles.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Pilsgate (PE9)
- County
- Lincolnshire
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Is resealing worth it?
Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
Read our pricing.
Common problems we fix in Pilsgate
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.
You may need us if you’ve spotted any of these:
- A messy previous reseal
- Unsealed corners
- Silicone coming away from the tiles
- Discoloured, yellow sealant
Questions to ask before you book
- What aftercare is recommended
- Whether the price is fixed and includes VAT
- If travel is included in the price
- How long the guarantee is and what it covers
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. On site, it takes around two hours. The room is left tidy and you will know when it can be used.
- All the old sealant is cut out and removed.
- We clean the joint and treat any mould.
- We make sure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
How to prepare
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
- Clear the area around the damage
Ask for a price
For a price in Pilsgate, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
How to care for the repair
After the repair has cured, a few habits help it last:
- Store bottles on a shelf
- Replace the seal when mould sets in
- Use the extractor fan
- Clean the joints with a mild cleaner
Leave the sealant to cure for the time we give you, normally about a day.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Hidden water damage
- Gaps so wide they need filling or trims before sealing
- Movement in the bath or tray
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Shower trays & enclosures
- Baths
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
Questions from Pilsgate
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Why does my sealant keep going mouldy?
Mould needs moisture. Ventilation and drying keep it clean longer.
When can I use the bath after resealing?
We’ll give you the curing time.
How do I get a price for bath resealing in Pilsgate?
The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Can you repair something that’s been repaired before?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Pilsgate, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
What else we do in Pilsgate
Our work in Pilsgate
Pilsgate is about 3 miles south-east of Stamford, in Lincolnshire. Jobs in Pilsgate are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in all 732 towns and villages in Lincolnshire, from the larger towns to small villages. Our jobs stretch from Pilsgate to Birmingham (63 miles away).
Here we cover the PE9 postcode area. Neighbouring places we cover include Barnack (1 mile south-east), Uffington (1 mile north), Newstead (2 miles north-west), Southorpe (2 miles south-east) and Wittering (2 miles south). Further out, we also cover Spalding (15 miles north-east), Stamford (3 miles north-west), Bourne (9 miles north), Austerby (9 miles north), Market Deeping (5 miles north-east) and Paston (8 miles east).
Around Pilsgate
In Pilsgate, that means homes near Barnack CofE (Controlled) Primary School, St John the Baptist's Church and The Millstone Public House, among other places. For rail, the closest station is Stamford station, roughly 2.3 miles west. A little further out are Stamford Baron St. Martin (2.2 miles west) and Maxey Castle (4.5 miles north-east). Green spaces nearby include Barnack Hills & Holes National Nature Reserve.
How we price bath resealing
There is no area surcharge for Pilsgate. What changes the price is:
- How much damage there is
- Access to the area
- The colour and finish to match
- What kind of damage it is
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Two or three clear pictures are typically enough. Try to include:
- A coin or ruler next to the damage for scale
- One picture of the whole bath or shower
- The material, if you know it
- One sharp close-up of the damage
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You will get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
