Bury · England

Bath Resealing in Pilsworth

Our repair technicians come to Pilsworth for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Sealant that’s split or lifting
  • A messy previous reseal
  • Black spots in the silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Pilsworth?

Bath resealing at your home in Pilsworth

Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours, plus curing time. We work on wet rooms, shower trays & enclosures and kitchen worktops & sinks, and the jobs we see most are mould you can’t clean out and sealant that’s split or lifting.

Big or small, it’s backed by a one-year guarantee in Pilsworth and across Bury.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Pilsworth (BL9)
Area hub
Bury
Cover
One year on every repair
Price
Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

Materials and what they mean for the repair

Baths

Baths are resealed with water in them, to open the joint fully.

Shower trays

Trays are sealed with weight on them, for the same reason.

How we price bath resealing

There are no hourly rates or hidden extras. The price is based on:

  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out
  • The material and finish
  • How easy the damage is to reach

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Send photos for a quote

Phone photos are fine. Make sure they show:

  • Any details about the material
  • A coin or ruler next to the damage for scale
  • Details of any past repairs
  • A close-up of the damage, in focus

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can price the job without visiting.

How the visit works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes around two hours. If anything looks different from your pictures, we will talk to you before going ahead.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. We make sure the joint is completely dry.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

How to prepare

  • Keep children and pets away from the room on the day
  • Tell us about parking, stairs or access
  • Open a window if you can

Get a quote

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.

Get a fixed price

Related advice

Landlords, agents and businesses in Pilsworth

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Why it’s worth resealing in Pilsworth

A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.

Why us?

  • Everything repaired in place
  • CHAS, Constructionline and SafeContractor accredited
  • Fixed prices from your pictures
  • One visit for most repairs

Take a look at our pricing.

When to call us in Pilsworth

Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.

It’s worth getting a quote if you see:

  • Water getting behind the bath or tray
  • Discoloured, yellow sealant
  • Black spots in the silicone
  • A messy previous reseal

What to look for in a quote

  • Is the price fixed, and does it include VAT?
  • Whether they match the colour on site
  • Whether a trained technician does the job
  • How changes to the job are handled

Choosing a repair company

About Pilsworth

Pilsworth is about 1 mile south-east of Gigg, in Bury. We visit customers in Pilsworth and the surrounding area, so you don’t need to take anything anywhere. Our repair technicians cover all 40 towns and villages in Bury, from the larger towns to small villages. Our jobs stretch from Pilsworth to Manchester (7 miles away).

Jobs in BL9 work the same way as everywhere else we cover. Jobs here include addresses on Aviation Road, Pilsworth Road and Roach Bank Road and the roads around them. We also travel to Gigg (1 mile north-west), Fishpool (1 mile north-west), Unsworth (1 mile south), Darnhill (2 miles north-east) and Whitefield (2 miles south). We also work in nearby towns such as Prestwich (4 miles south), Ramsbottom (5 miles north-west), Tottington (4 miles north-west), Brandlesholme (3 miles north-west), Greenmount (4 miles north-west) and Stoneclough (4 miles south-west).

What’s near Pilsworth

In Pilsworth, that means homes near Hollins Grundy Primary School, Holy Cross College and Queen Anne pub. The closest station to Pilsworth is Clifton station, about 4.1 miles south of the centre. A little further out are Bealey Community Hospital (1.6 miles south-west) and The Fusilier Museum (1.3 miles north-west). The countryside around Pilsworth includes Nob End.

Map of Pilsworth © OpenStreetMap contributors

When a repair isn’t the answer

A few problems are outside what a surface repair can do:

  • Gaps too big for silicone alone
  • Tiles that move, until they’re refixed
  • A bath or tray that moves, until its support is fixed

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths

FAQs for Pilsworth

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Why does mould come back so fast?

Mould needs moisture. Ventilation and drying keep it clean longer.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Can you repair several things at once?

Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.

How long before I can shower?

You will get the curing time from us, typically around a day.

My seal keeps tearing. Why?

Something is moving. Persistent splitting can mean the support needs attention.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

It’s been repaired before. Can you still fix it?

Most of the time. Let us know what was used before and we will plan for it.

How to care for the repair

A little care keeps the finish looking good. We recommend:

  • Wipe the joints dry after use
  • Reseal at the first sign of lifting
  • Open a window after bathing
  • Clean the sealant gently and regularly

Let it cure fully before using the bath or shower, normally about a day.

Black mould in sealant isn’t just unsightly. Resealing early keeps water out of the walls and floor.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.