Bath and North East Somerset · England
Bath Resealing in Pipehouse
Bath, shower and sink resealing with new mould-resistant silicone at your home in Pipehouse, with a one-year guarantee on every repair.
- A messy previous reseal
- Missing sealant behind the taps
- Damp near the bath
Bath resealing in Pipehouse without replacing anything
We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours. Whether it’s an untidy old seal and sealant that’s split or lifting, we can help.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Pipehouse (BA2)
- Area hub
- Bath and North East Somerset
- Warranty
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Pipehouse
Every quote is fixed and free. What we look at:
- Whether old repairs or coatings need taking off
- The type of damage
- The size and number of damaged areas
- Whether we combine several jobs
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Photographing the damage takes a minute. Please include:
- Your postcode, so we can check dates
- A wider photo showing the whole bath or shower
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
Send us pictures of the damage and one of the entire item, with your BA2 postcode, and we will come back with a fixed quote.
Landlords, agents and businesses in Pipehouse
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to around two hours, including clearing up.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Get a quote
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Why reseal now?
Resealing is a small job. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why Pipehouse customers choose us
- Same prices wherever you are
- A fixed quote before you book
- No need to remove anything
- Straight answers about what a repair can do
Take a look at our prices page.
Pipehouse and nearby
Pipehouse is about 4 miles south-east of Bath, in Bath and North East Somerset. Jobs in Pipehouse are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Pipehouse is one of 136 towns and villages in Bath and North East Somerset we cover. You can also see our page for Birmingham, about 80 miles away.
Our repair technicians cover all of the BA2 postcode area. If you are just outside Pipehouse, we cover Freshford (1 mile east), Limpley Stoke (1 mile north-east), Hinton Charterhouse (1 mile south), Midford (1 mile north-west) and Tucking Mill (1 mile north-west). Further out, we also cover Bath (4 miles north-west), Keynsham (9 miles north-west), Bathwick (4 miles north), Walcot (4 miles north), Westmoreland (4 miles north-west) and Kingsmead (4 miles north-west).
Near you in Pipehouse
Locally, our jobs take us to homes close to The Hop Pole Inn, Monkton Combe School and Freshford Church School, among other places. Other local landmarks include Ralph Allen School (1.8 miles north) and Church of St Mary (0.6 miles north-east). The closest station to Pipehouse is Freshford station, about 1 mile east of the centre. Well-known places in the area include American Museum and Gardens (2.8 miles north) and Royal National Hospital for Rheumatic Diseases (4.7 miles north-west).
What we cannot put right
In fairness, there are a few things a repair won’t fix:
- Gaps too big for silicone alone
- A flexing bath
- Hidden water damage
Send us photos and we’ll tell you honestly.
Materials we work on in Pipehouse
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Baths
Questions from Pipehouse
When can I use the bath after resealing?
You will get the curing time from us, typically around a day.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
How do I get a price for bath resealing in Pipehouse?
Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item and your postcode.
Which areas do you work in?
We cover the entire UK, including Pipehouse and the rest of Bath and North East Somerset. Just include your postcode and we will offer you dates.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Do you cover Pipehouse?
Yes. We cover the entire UK and come to Pipehouse. Send pictures and we will quote, or call 0345 017 0787.
Why does my sealant keep splitting?
Something is moving. If it keeps happening, the support may need fixing.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Common problems we fix in Pipehouse
Poor ventilation speeds things up: damp hangs around, and mould takes hold.
If you can see any of these, send us a photo:
- Damp near the bath
- Sealant that is split or lifting
- Black mould in the sealant
- Silicone smeared on tiles
Before you book anyone
- How the colour is matched
- How to care for the finish
- How changes to the job are handled
- How long it needs to cure
Towns and villages near Pipehouse
Also in Pipehouse
What your bath or shower is made of matters
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
About our accreditations · Every repair comes with a one-year guarantee.
