Greater London · England

Bath Resealing in Pratt's Bottom

Bath resealing for Pratt's Bottom, without a refit. Get a fixed price from your photos, then book a visit.

  • Unsealed corners
  • Stained silicone
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Pratt's Bottom

Bath resealing in Pratt's Bottom without replacing anything

Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Typical jobs include gaps by the taps and mould you can’t clean out, on baths, basins & vanity units and shower trays & enclosures.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Roll-top bath being refinished by a Surface Doctor technician
Where
Pratt's Bottom (BR6, TN14)
Area hub
Greater London
Warranty
A year, on every repair
Price
Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026

Resealing in Pratt's Bottom: why it matters

Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

What you get with us

  • Same prices wherever you are
  • Dust sheets down, tidy finish
  • CHAS, Constructionline and SafeContractor accredited
  • Nothing taken out or refitted

Take a look at our full price list.

Signs you need bath resealing in Pratt's Bottom

In time, even good sealant discolours. Steam, soap and movement all wear it down.

Look out for any of the following:

  • Gaps in the seal
  • Silicone smeared on tiles
  • Black mould in the sealant
  • Old sealant that looks dirty

Comparing quotes

  • If travel is included in the price
  • Who turns up on the day
  • How to look after the finish
  • What happens if the damage is worse than the photos show

Our hiring checklist

What your bath or shower is made of matters

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

We put weight on a tray before sealing it, for the same reason.

FAQs for Pratt's Bottom

How long does resealing take?

Usually a couple of hours, then it needs to cure.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

Is there any odour?

Some materials have a smell while they’re applied. It clears as the materials cure.

What information do you need?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Do you cover the entire of Greater London?

The whole UK, including all of Greater London. Just include your postcode and we’ll confirm dates.

Our work in Pratt's Bottom

Pratt's Bottom is about 3 miles south of Orpington, in Greater London. Clients in Pratt's Bottom get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We work in all 764 towns and villages across Greater London, from the larger towns to small villages. You can also see our page for London, about 14 miles away.

Our visits in BR6 and TN14 are booked in the same way as anywhere else. Whether you live on Orchard Road, Runciman Close and Downs View Close or anywhere nearby, a technician can come to you. We also cover the places around Pratt's Bottom: Halstead (1 mile south-east), Chelsfield (1 mile north-east), Bopeep (1 mile north-east), Badgers Mount (1 mile east) and Maypole (1 mile north-east). Within a short drive, we also cover London (14 miles north-west), Shoreditch (15 miles north-west), Whitechapel (14 miles north-west), Stockwell (13 miles north-west), Orpington (3 miles north) and Wimbledon (15 miles west).

Landmarks near Pratt's Bottom

Typical jobs here are in homes near Hewitt's Chalk Bank, Green Street Green Primary School and All Souls' Church, among other places. The nearest railway station is Knockholt station, about 0.8 miles east. Further afield, we also cover the area around Crofton Roman Villa (2.4 miles north-west) and Lullingstone Castle (3.8 miles east). Not far away are Betsom's Hill and Downe Bank Nature Reserve.

Map of Pratt's Bottom © OpenStreetMap contributors

What bath resealing costs

Prices are worked out job by job. The main factors are:

  • Whether we combine several jobs
  • How much damage there is
  • What the surface is made of
  • Previous DIY repairs that have to come out

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Quotes from your pictures

Most quotes are done from photos alone. To make it quick:

  • Where you are, by postcode
  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • One picture of the entire bath or shower

Most clients in Pratt's Bottom get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

What happens on the day

Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. It normally takes about two hours for a bath, and we will keep you posted as we go.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Keep a parking space free if you can
  • Clear the area around the damage

Ask for a price

Send us pictures of the damage and a wider shot of the entire item, with your BR6 postcode, and we’ll reply with a fixed price.

Get a free quote

Advice

Looking after it afterwards

So the finish stays in good condition:

  • Clean the joints with a mild cleaner
  • Air the room after use
  • Store bottles on a shelf
  • Ventilate the bathroom well

Good ventilation is the best protection, and dry the joints after bathing.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

When a repair is not the answer

Some jobs are not right for a repair, including:

  • A bath or tray that moves, until its support is fixed
  • Hidden water damage
  • Loose tiles, which need refixing first

Send us pictures and we’ll tell you honestly.

What we work on

  • Basins & vanity units
  • Shower trays & enclosures
  • Baths
  • Kitchen worktops & sinks
  • Wet rooms
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.