Bridgend · Wales

Bath & shower resealing (mastic) in Price Town, Bridgend

Bath, shower and sink resealing with new mould-resistant silicone in Price Town, carried out at your home and guaranteed for a year.

  • Discoloured, yellow sealant
  • An untidy old seal
  • Sealant that’s split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Price Town

How we handle bath resealing in Price Town

We reseal baths with them filled with water, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Whether it’s gaps by the taps and an untidy old seal, we can help, on wet rooms, baths and shower trays & enclosures alike.

Every repair is covered by our one-year guarantee, wherever you are in Bridgend.

Where
Price Town (CF32)
Area hub
Bridgend
Cover
A year, on every repair
Quote
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Honest limits

A repair is not right for every job, including:

  • A bath or tray that moves, until its support is fixed
  • Water damage behind the bath that needs a builder
  • Hollow or loose tiles

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Basins & vanity units
  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Baths

Landlord and trade work in Price Town

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

When to call us in Price Town

Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.

It’s worth getting a quote if you see:

  • A messy previous reseal
  • Old sealant that looks dirty
  • Water getting behind the bath or tray
  • Black spots in the silicone

What your quote should include

  • How to care for the finish
  • Who turns up on the day
  • The length of the guarantee and what it covers
  • Whether there are any call-out or travel charges

Our hiring checklist

Our work in Price Town

Price Town is about 3 miles south-west of Rhondda, in Bridgend. We visit homes and businesses in Price Town and the surrounding area, so nothing has to leave your home. Price Town is one of 91 places in Bridgend we cover.

Every address in CF32 is covered. Jobs here include addresses on Ogwy Street, Oakfield Terrace and Aberfields View and the roads around them. If you’re just outside Price Town, we cover Nant-y-moel (1 mile north), Wyndham (1 mile south-west), Ogmore Vale (1 mile south), Pontycymer (2 miles west) and Blaengarw (2 miles west). Larger places within reach include Bridgend (8 miles south), Maesteg (5 miles west), Porthcawl (12 miles south-west), Newcastle Higher (8 miles south), Ynysawdre (5 miles south-west) and Pencoed (6 miles south).

Near you in Price Town

Around Price Town, we work in homes near Nantymoel Primary School, St David's Church and The Blaenogwr pub and the streets around them. For rail, the closest station is Ton Pentre station, roughly 3 miles north-east. A little further out are Llwynypia Hospital (4 miles east) and Moel Garn (1.5 miles west). For a walk, there is Ferndale Lake and Mynydd Ton.

Map of Price Town © OpenStreetMap contributors

Why it’s worth resealing in Price Town

Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why us?

  • Straight answers about what a repair can do
  • One-year guarantee on every repair
  • A fixed quote before you book
  • One visit for most repairs

See our prices page.

How it works

We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take around two hours, and the room is left clean and tidy.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Plan for the room to be out of bounds to pets and children
  • Mention any earlier repairs or resurfacing

How to get a price

Upload photos of the damage and one of the whole item, and tell us you’re in Price Town, and we will come back with a fixed quote.

Send photos for a quote

Read more

Price Town: your questions answered

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Why does my sealant keep going mouldy?

Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.

Why does my sealant keep splitting?

Typically because the bath or tray moves. We fill the bath before sealing it.

What if the damage is worse than the photos show?

Your quote covers the damage in the photos. If there is more, we will tell you before starting.

Which areas do you work in?

Everywhere in the UK, Price Town included. There is no extra charge for travel.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we will do the rest.

Is there a call-out fee?

We do not add a call-out fee. Your fixed price includes everything.

Do you cover Price Town?

We do. We send a technician to Price Town for every job, and the price is the same as everywhere else.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

Prices and what affects them

You won’t pay by the hour. The price depends on:

  • Whether we combine several jobs
  • How much damage there is
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send pictures for a quote

The better the photos, the more accurate the price. Here’s what helps:

  • Whether it’s been repaired or coated before
  • A wider photo showing the whole bath or shower
  • Something in shot to show the size
  • The material, if you know it

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Looking after it afterwards

To keep it looking its best for years:

  • Clean the sealant gently and regularly
  • Air the room after use
  • Use the extractor fan
  • Reseal when black spots won’t clean off

Do not scrape the sealant with anything sharp, and don’t stand bottles on the seal.

Damp below or loose tiles need checking quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.