Bridgend · Wales
Bath Repair for Price Town homes
Bath repair in Price Town without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Rust spots around the plughole
- A cracked acrylic bath
Bath repair in Price Town, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. Our repair technicians work on acrylic, cast iron enamel and pressed steel enamel, and common reasons people get in touch are a hole punched through by something heavy and rust spots around the plughole.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Area
- Price Town (CF32)
- Area hub
- Bridgend
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Price Town
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Look out for these signs:
- Hairline or through cracks in acrylic
- Deep scratches in acrylic
- Chips under the taps
- A chipped rim or side
What to look for in a quote
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- How your room will be protected
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Why book with us
- Colours mixed by hand to suit your surface
- A year’s guarantee on all work
- One price list for the entire UK
- Work done at your home or business
Take a look at our full price list and guide to resurfacing and replacement costs.
The process
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. You can expect it to take two to three hours for most chips, and we will keep you posted as we go.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can generally use the bath the following day.
How to prepare
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
Aftercare tips
After the repair has cured, a few habits help it last:
- Check that an acrylic bath doesn’t move when you stand in it
- Have new chips seen to early
- Give the bath a quick rinse after use
- A dripping tap stains enamel, so fix it early
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
Nearby places to Price Town
Also in Price Town
What bath repair costs
Repairs from £95. We price every job individually, from your photos. The main factors are:
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- How easy the damage is to reach
- What the surface is made of
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed price
Good pictures mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- Something in shot to show the size
- Any earlier repairs or coatings
- Any details about the material
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
What we can’t put right
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
Price Town questions
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send photos.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we’ll plan for it.
How long does the repair take to cure?
Generally within a day, depending on the repair.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Where we work around Price Town
Price Town is about 3 miles south-west of Rhondda, in Bridgend. Whether you are in the middle of Price Town or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 91 places in Bridgend.
We cover every part of CF32. We regularly work on streets such as Ogwy Street, Oakfield Terrace and Aberfields View and the roads around them. If you’re just outside Price Town, we cover Nant-y-moel (1 mile north), Wyndham (1 mile south-west), Ogmore Vale (1 mile south), Pontycymer (2 miles west) and Blaengarw (2 miles west). Further out, we also cover Bridgend (8 miles south), Maesteg (5 miles west), Porthcawl (12 miles south-west), Newcastle Higher (8 miles south), Ynysawdre (5 miles south-west) and Pencoed (6 miles south).
Local landmarks in Price Town
Around Price Town, we work in homes near Nantymoel Primary School, St David's Church and The Blaenogwr pub and the streets around them. For rail, the closest station is Ton Pentre station, about 3 miles north-east. Further afield, we also cover the area around Llwynypia Hospital (4 miles east) and Moel Garn (1.5 miles west). Open spaces near Price Town include Ferndale Lake and Mynydd Ton.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
