Bridgend · Wales
Bath & shower resealing (mastic) in Pyle, Bridgend
Bath resealing for Pyle, without a refit. Send us photos for a fixed quote, then we come to you.
- Mould you cannot clean out
- Leaks at the edges
- Unsealed corners
Bath resealing in Pyle without replacing anything
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. We work on shower trays & enclosures, wet rooms and basins & vanity units, and people most often call us about black mould in the sealant and unsealed corners.
All of our repairs are guaranteed for twelve months in Pyle and everywhere else. If something goes wrong with the work, we come back.
- Location
- Pyle (CF33)
- County
- Bridgend
- Cover
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, to open the joint fully.
Pyle and the surrounding area
Pyle (Welsh: Y Pil) is about 3 miles north of Porthcawl, in Bridgend. From the centre of Pyle to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Pyle is one of 91 towns and villages in Bridgend we cover.
Postcode districts we cover here: CF33. We regularly work on streets such as Baiden Avenue, North Avenue and Pisgah Street. Nearby, we also work in Mynyddcynffig (1 mile north-east), Kenfig Hill (1 mile north), Llandudwg Uchaf (1 mile south-east), Pen-y-bryn (1 mile north) and Cefn Cribwr (2 miles east). Further out, we also cover Bridgend (5 miles east), Maesteg (6 miles north), Porthcawl (3 miles south), Newcastle Higher (5 miles south-east), Ynysawdre (4 miles east) and Pencoed (8 miles east).
What’s near Pyle
In Pyle, that means homes near Walnut Tree pub, St James's Church and Cynffig Comprehensive School and the streets around them. For rail, the closest station is Pyle station, roughly 0.6 miles south-west of the centre. Other landmarks nearby include Margam Stones Museum (3 miles north-west) and Glanrhyd Hospital (4.2 miles east). Open spaces near Pyle include Cornelly Quarry Lake 1 and Stormy Down.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Very wide gaps that need a trim
- A bath or tray that moves, until its support is fixed
- Hollow or loose tiles
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Shower trays & enclosures
- Baths
- Wet rooms
- Kitchen worktops & sinks
- Basins & vanity units
Pyle: your questions answered
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
How much does bath resealing cost in Pyle?
Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Can you price it without visiting?
Generally, yes. Clear photos let us give you a fixed price without visiting.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Prices and what affects them
Prices are worked out job by job, from your pictures. The main factors are:
- Where the damage is and how we get to it
- The material
- How many areas need work
- How many items we do on one visit
Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed quote
You can take the pictures on your phone, there is no need for anything special. Just make sure we can see:
- A clear, close picture of the problem area
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Clean the joints with a mild cleaner
- Open a window after bathing
- Ventilate the bathroom well
- Dry the seal after bathing
Leave the sealant to cure for the time we give you, normally about a day.
Mouldy sealant is more than a cosmetic problem. Resealing early keeps water out of the walls and floor.
Why it’s worth resealing in Pyle
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why book with us
- One-year guarantee on every repair
- Technicians who travel to you, UK-wide
- Rooms protected and left tidy
- Everything repaired in place
Read our prices page.
Do you need bath resealing in Pyle?
Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.
The things customers generally mention when they call are:
- Silicone coming away from the tiles
- Mould you can’t clean out
- Leaks at the edges
- Missing sealant behind the taps
What to look for in a quote
- What prep work is covered
- What aftercare is recommended
- Who will actually do the work
- Whether the colour is mixed to match
Landlord and trade work in Pyle
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes around two hours, and we finish with a tidy-up and a look at the finished work together.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
Preparing for the visit
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Ask for a price
Email us a picture of the damage and one of the entire item, with your CF33 postcode, and we will reply with a fixed quote.
Related advice
Nearby places to Pyle
What else we do in Pyle
About our accreditations · Every repair comes with a one-year guarantee.
