Hertfordshire · England
Bath Resealing for Radlett homes
Bath, shower and sink resealing with new mould-resistant silicone in Radlett, carried out at your home and guaranteed for a year.
- Black spots in the silicone
- Water getting behind the bath or tray
- Silicone smeared on tiles
How we handle bath resealing in Radlett
A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they protect the walls and floor. Common call-outs are for mould you can’t clean out and old sealant that looks dirty, in wet rooms, baths and kitchen worktops & sinks.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Radlett (WD7)
- Region
- Hertfordshire
- Cover
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
To be straight with you, some problems need a different fix:
- Water damage behind the bath that needs a builder
- A flexing bath
- Loose tiles, which need refixing first
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Radlett
- Baths
- Kitchen worktops & sinks
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
Different materials, different repairs
Baths
Baths are resealed with water in them, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Our work in Radlett
Radlett is about 3 miles north-west of Borehamwood, in Hertfordshire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Our repair technicians cover 381 places across Hertfordshire. We work right across the region, from Radlett to London (16 miles away).
Here we cover the WD7 postcode area. Jobs here include addresses on Upper Station Road, Station Road and Barn Close and the roads around them. You will find Radlett on the B462 and A5183, so it’s easy for us to reach. If you are just outside Radlett, we cover Kemprow (1 mile west), Round Bush (1 mile south-west), Letchmore Heath (1 mile south-west), Aldenham (2 miles south-west) and Patchetts Green (2 miles south-west). Larger places within reach include Watford (4 miles south-west), Hemel Hempstead (8 miles north-west), St Albans (5 miles north), Welwyn Garden City (10 miles north-east), Harpenden (9 miles north) and Hoddesdon (14 miles east).
Near you in Radlett
We visit homes around St John's Church of England Infant and Nursery School, The Cat And Fiddle Public House and St John. Radlett has its own railway station: Radlett station. A little further out are Radlett and District Museum (less than half a mile south-east) and Harlequin Centre (3.7 miles south-west). For a walk, there is Verulamium Lake and Broad Colney Lakes.
FAQs for Radlett
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
My seal keeps tearing. Why?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Why does my sealant keep going mouldy?
Damp is the cause. Ventilation and drying keep it clean longer.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
How we price bath resealing
You will not pay by the hour. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The material
- Unusual colours or finishes
- Any earlier repairs that need removing first
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from pictures
You can generally get a fixed quote without us visiting. To make it quick:
- Whether it’s been repaired or coated before
- Any details about the material
- A picture taken from further back
- Good light, ideally daylight, without flash glare
For a price in Radlett, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What we are called out for in Radlett
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.
People normally call us when they notice one of these:
- Black spots in the silicone
- Discoloured, yellow sealant
- Damp near the bath
- Gaps in the seal
What to look for in a quote
- Who will actually do the work
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
- What protection goes down before work starts
Keeping it looking good
Once the work has cured, treat it gently:
- Dry the seal after bathing
- Give the seal a regular clean
- Air the room after use
- Keep bottles off the joints
Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
Places near Radlett
More services for Radlett
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a couple of hours. We tidy up before we leave and let you know when you can use it again.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Before we arrive
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
- Let the surface dry out before the visit
Ask for a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
