Norfolk · England

Bath Resealing for Reymerston homes

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Reymerston. Send pictures for a free, fixed quote.

  • Sealant that’s split or lifting
  • Unsealed corners
  • Mould you can’t clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Reymerston homes

About our bath resealing in Reymerston

The key to a good reseal is getting all of the old silicone out. New silicone will not bond to old, which is why many DIY jobs peel. Typical jobs include mould you can’t clean out and an untidy old seal, on shower trays & enclosures, basins & vanity units and baths.

All our work comes with our one-year guarantee, wherever you are in Norfolk.

Technician in a mask working on a freestanding roll-top bath
Area
Reymerston (NR9)
Area hub
Norfolk
Guarantee
A year, on every repair
Quote
Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

How it works

Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for around two hours. Before we go, we will explain when it can be used and how to care for it.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Preparing for the visit

  • Point us to the nearest place to park
  • Let us know which floor the room is on
  • Ensure the room can be ventilated

Ask for a price

For a price in Reymerston, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Send pictures for a quote

Advice

Signs you need bath resealing in Reymerston

Sealant splits when the bath or tray moves, frequently because it was sealed while the bath was empty.

The things clients usually mention when they call are:

  • A messy previous reseal
  • Black spots in the silicone
  • Silicone coming away from the tiles
  • Damp near the bath

What your quote should include

  • Whether the colour is mixed to match
  • Whether a trained technician does the job
  • How soon you can use it again
  • How changes to the job are handled

Our hiring checklist

Reymerston and nearby

Reymerston is about 5 miles south-east of Dereham, in Norfolk. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in 797 places across Norfolk.

We work across NR9 and the streets around it. You’ll find streets such as The Street and Tinkers' Lane. If you are just outside Reymerston, we cover North Green (1 mile north), Garvestone (1 mile north), Southburgh (2 miles south-west), Whinburgh (2 miles north-west) and Cranworth (3 miles west). Further out, we also cover Norwich (13 miles east), Dereham (5 miles north-west), Wymondham (6 miles south-east), Sprowston (14 miles east), Thorpe St Andrew (15 miles east) and Attleborough (7 miles south).

Local landmarks in Reymerston

In Reymerston, that means homes near Church of St Peter and Garvestone Community Primary School. Open spaces near Reymerston include Scoulton Mere.

Map of Reymerston © OpenStreetMap contributors

Prices and what affects them

Prices are worked out job by job, from your photos. What matters most is:

  • How many items we do on one visit
  • How hard the colour is to match
  • Access to the area
  • Whether it’s a chip, crack, burn or wear

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.

How to get a fixed price

When you take your photos, these tips help us give you a firm price:

  • Any earlier repairs or coatings
  • A photo taken from further back
  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Repairs by material

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Shower trays

Trays are sealed with weight on them, for the same reason.

How to care for the repair

Aftercare is simple, and it makes a real difference:

  • Wipe the joints dry after use
  • Keep bottles off the joints
  • Air the room after use
  • Replace the seal when mould sets in

Let it cure fully before using the bath or shower, normally about a day.

Damp below or loose tiles need checking quickly. There may be more going on, and we’ll say if you need a builder or plumber.

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

Honest limits

We’d rather lose a job than do one that won’t last, so these are the limits:

  • Movement in the bath or tray
  • Hollow or loose tiles
  • Water damage behind the bath that needs a builder

Send us pictures and we’ll tell you honestly before you book.

Materials we repair

  • Basins & vanity units
  • Shower trays & enclosures
  • Baths
  • Kitchen worktops & sinks
  • Wet rooms

Landlord and trade work in Reymerston

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Reymerston questions

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

How long does silicone take to cure?

You will get the curing time from us, typically around a day.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Do you cover the whole of Norfolk?

We cover the whole UK, including Reymerston and the rest of Norfolk. Just include your postcode and we will offer you dates.

How long will it take?

Most reseals take about two hours. Leave it to cure before use.

Do you come to Reymerston?

Yes. We cover the whole UK and come to Reymerston. Send photos and we will quote, or call 0345 017 0787.

Do you seal over the old sealant?

Never over old. The old sealant is cut out and the joint cleaned and dried.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.