Staffordshire · England
Bath Resealing in Rocester
We travel to Rocester for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Damp near the bath
- Black spots in the silicone
- An untidy old seal
About Rocester
Rocester is about 4 miles north of Uttoxeter, in Staffordshire. Whether you are in the middle of Rocester or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover 512 places in Staffordshire. Our nearest city page is Birmingham, about 33 miles away.
Jobs in ST14 work the same way as everywhere else we cover. From High Street, Atkins Way and Podmore View or anywhere nearby, we can come to you. Neighbouring places we cover include Stubwood (1 mile west), Denstone (1 mile north-west), Waldley (2 miles south-east), Roston (2 miles north-east) and Norbury (2 miles north-east). Further out, we also cover Stafford (15 miles south-west), Burton upon Trent (13 miles south-east), Longton (13 miles west), Rugeley (14 miles south), Stone (13 miles west) and Leek (13 miles north-west).
What’s near Rocester
Locally, our jobs take us to homes close to The Red Lion pub, Dove CofE (VC) First School and The JCB Academy. The closest station to Rocester is Uttoxeter station, roughly 3.8 miles south of the centre. Nearby you will also find Alton Castle (3 miles north-west) and Redfern's Cottage (3.8 miles south). The countryside around Rocester includes Thorswood.
How we handle bath resealing in Rocester
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Typical jobs include discoloured, yellow sealant and a messy previous reseal, in basins & vanity units, wet rooms and kitchen worktops & sinks.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Location
- Rocester (ST14)
- Region
- Staffordshire
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Why it’s worth resealing in Rocester
Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
- Fixed prices from your photos
- A year’s guarantee on all work
See our full price list.
Landlords, agents and businesses in Rocester
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to around two hours.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
How to prepare
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Do you need bath resealing in Rocester?
Most reseals are because of black mould. It grows into the silicone, so cleaning can’t get it all out.
Most people get in touch after spotting something like this:
- Stained silicone
- Missing sealant behind the taps
- Water getting behind the bath or tray
- Black mould in the sealant
Comparing quotes
- How the colour is matched
- What happens if the damage is worse than the pictures show
- What the guarantee covers, and for how long
- What aftercare is recommended
FAQs for Rocester
How much does bath resealing cost in Rocester?
The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
How long does silicone take to cure?
Normally about a day later. We will tell you the exact time.
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
We fill the bath before sealing, so the joint is at its widest.
What else we do in Rocester
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Run the extractor fan during and after showers
- Let steam out after showers
- Wipe the joints dry after use
- Store bottles on a shelf
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
What we cannot put right
A few problems are outside what a surface repair can do:
- Gaps so wide they need filling or trims before sealing
- Tiles that move, until they’re refixed
- Water damage behind the bath that needs a builder
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
- Wet rooms
About our accreditations · Every repair comes with a one-year guarantee.
