North Yorkshire · England
Bath Resealing for Romanby homes
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Romanby and across North Yorkshire. Send pictures for a free, fixed quote.
- Old sealant that looks dirty
- A messy previous reseal
- Silicone coming away from the tiles
Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. Our prices are the same across the UK, with no extra for Romanby. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- We will tell you if it’s not worth repairing
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
- We leave the room as we found it
Read our prices page.
About our bath resealing in Romanby
Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. We work on baths, wet rooms and kitchen worktops & sinks, and the jobs we see most are missing sealant behind the taps and stained silicone.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Romanby (DL7)
- Region
- North Yorkshire
- Warranty
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath resealing in Romanby
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Why does my sealant keep going mouldy?
Damp is the cause. Ventilation and drying keep it clean longer.
How long does silicone take to cure?
We will give you the curing time, normally around a day.
How much does bath resealing cost in Romanby?
We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your DL7 postcode.
Do you seal over the old sealant?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Towns and villages near Romanby
More services for Romanby
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to about two hours for a bath.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
Get a quote
Upload a picture of the damage and one of the entire item, with your DL7 postcode, and we will reply with a fixed quote.
Related advice
What affects the price in Romanby
We charge the same across the UK, including Romanby. What changes the price is:
- Any earlier repairs that need removing first
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from photos
You can normally get a fixed price without us visiting. To help us price it:
- Daylight if possible, and no flash reflection
- Any details about the material
- A coin or ruler next to the damage for scale
- One picture of the whole bath or shower
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
When a repair is not the answer
A repair isn’t right for every job, including:
- Hollow or loose tiles
- Gaps so wide they need filling or trims before sealing
- Rotten walls or floors behind the bath
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Wet rooms
- Kitchen worktops & sinks
Looking after it afterwards
Nothing complicated is needed:
- Store bottles on a shelf
- Reseal when black spots will not clean off
- Use the extractor fan
- Dry the seal after bathing
Keep the room well ventilated, and wipe the joints after use so mould struggles to take hold.
Damp below or loose tiles need checking quickly. It may be more than a reseal, and we’ll say if you need a builder or plumber.
Landlords, agents and businesses in Romanby
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
When to call us in Romanby
Most reseals are because of black mould. It grows into the sealant itself, so cleaning can’t get it all out.
Most people contact us after spotting something like this:
- Sealant that’s split or lifting
- Stained silicone
- An untidy old seal
- Gaps by the taps
What to look for in a quote
- How long the guarantee is and what it covers
- What happens if the damage is worse than the photos show
- What aftercare is recommended
- If travel is included in the price
Covering Romanby
Romanby is about 1 mile south-west of Northallerton, in North Yorkshire. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Our repair technicians cover all 626 towns and villages across North Yorkshire. We work right across the region, from Romanby to Leeds (about 36 miles away).
All of DL7 is within our area. Streets in the area include Hambleton Avenue, Poplar Crescent and Harewood Chase, all of which we cover. Romanby sits on or near the B1333, so getting to you is simple. Other places close to Romanby include Northallerton (1 mile north-east), Yafforth (2 miles north-west), Ainderby Steeple (2 miles west), Morton-on-Swale (2 miles west) and Brompton (2 miles north). We also work in nearby towns such as Ripon (14 miles south), Catterick Garrison (11 miles west), Richmond (13 miles north-west), Thirsk (8 miles south-east), Colburn (10 miles west) and Stokesley (14 miles north-east).
Around Romanby
Typical jobs here are in homes near The Nags Head pub, Church of St James the Great and Northallerton College. There’s a railway station in Romanby itself: Northallerton station. Nearby you will also find Friarage Hospital (1.2 miles north-east) and Sigston Castle (3.7 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
