Surrey · England
Bath & shower resealing (mastic) in Rowledge, Surrey
Bath resealing in and around Rowledge: photo quotes, tidy work and a year’s guarantee.
- Sealant that is split or lifting
- Discoloured, yellow sealant
- Damp near the bath
How we handle bath resealing in Rowledge
Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, as one neat, continuous bead. Typical jobs include mould you can’t clean out and missing sealant behind the taps, across baths, shower trays & enclosures and kitchen worktops & sinks.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Rowledge (GU10)
- County
- Surrey
- Warranty
- 12 months on all our work
- Quote
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Rowledge
Rowledge is about 2 miles south-west of Farnham, in Surrey. Our technicians come to homes and businesses in Rowledge and the surrounding area, so you don’t need to take anything anywhere. We work in 395 places in Surrey, from the larger towns to small villages. You can also see our page for London, about 38 miles away.
Here we cover the GU10 postcode area. Jobs here include addresses on High Street, Chapel Road and Bell Lane. Close by, we cover Holt Pound (1 mile west), Boundstone (1 mile north-east), Wrecclesham (1 mile north), Shortheath (1 mile north-east) and Batt's Corner (1 mile south). Within a short drive, we also cover Guildford (12 miles east), Woking (14 miles north-east), Camberley (11 miles north), Frimley (10 miles north-east), Haslemere (8 miles south-east) and Cranleigh (15 miles east).
Landmarks near Rowledge
In Rowledge, that means homes near Saint James, The Hare and Hounds pub and Rowledge Church of England Controlled Primary School and the streets around them. Nearby too are Underdown nature reserve (0.8 miles north-east), Weydon School (1.3 miles north) and Edgeborough School (1.2 miles east). For rail, the closest station is Bentley (Hampshire) station, roughly 2 miles west of the centre. A little further out are Chase Community Hospital (5.6 miles south) and Museum of Farnham (2.2 miles north). Open spaces near Rowledge include Beacon Hill and Farnham Heath.
Towns and villages near Rowledge
More services for Rowledge
What bath resealing costs
We don’t charge extra for travel to Rowledge. The price comes down to:
- What the surface is made of
- Whether old repairs or coatings need taking off
- What kind of damage it is
- The colour and finish to match
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send photos for a quote
Two or three clear pictures are typically enough. Try to include:
- What it’s made of, if you know
- Where you are, by postcode
- Details of any past repairs
- One picture of the entire bath or shower
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Why reseal now?
Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Rowledge
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- Most jobs done in one visit
- One-year guarantee on every repair
Take a look at our full price list.
Rowledge: your questions answered
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Why does my sealant keep splitting?
Movement is the usual cause, or it was sealed with the bath empty. We seal baths full of water.
Why does my sealant keep going mouldy?
Generally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
When can I use the bath after resealing?
Normally about a day later. We’ll tell you the exact time.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
How to care for the repair
So the finish stays in good condition for years:
- Let steam out after showers
- Use the extractor fan
- Reseal when black spots won’t clean off
- Clean the sealant gently and regularly
Good ventilation is the best protection, and dry the joints after bathing so mould struggles to take hold.
Mouldy sealant is more than a cosmetic problem. Resealing early keeps water out of the walls and floor.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
For anyone letting property in or around Rowledge, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, to open the joint fully.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
When to call us in Rowledge
Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.
People usually call us when they notice one of these:
- Missing sealant behind the taps
- Damp near the bath
- A messy previous reseal
- Sealant that is split or lifting
Questions to ask before booking
- Aftercare advice
- What the guarantee covers, and for how long
- If travel is included in the price
- What protection goes down before work starts
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take around two hours, and the room is left clean and tidy.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We make sure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
How to prepare
- Let the surface dry out before the visit
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
Get a quote
If you are in Rowledge and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
