Staffordshire · England

Bath Resealing for Rudyard homes

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Rudyard and across Staffordshire. Free, fixed quotes from your pictures.

  • Black spots in the silicone
  • Leaks at the edges
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Rudyard

Bath resealing in Rudyard without replacing anything

Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Our repair technicians work on shower trays & enclosures, kitchen worktops & sinks and wet rooms, and the jobs we see most are gaps in the seal and damp near the bath.

A one-year guarantee comes as standard, so you’re covered after the visit.

Location
Rudyard (ST13)
Area hub
Staffordshire
Guarantee
A year, on every repair
Quote
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Where we work around Rudyard

Rudyard is about 2 miles north-west of Leek, in Staffordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 512 places in Staffordshire. Our jobs stretch from Rudyard to Manchester (about 25 miles away).

Jobs in ST13 work the same way as everywhere else we cover. Streets in the area include Camrose Hill, Lake Road and The Drive, all of which we cover. Close by, we cover Harper's Gate (1 mile south), Horton (1 mile south-west), Poolend (1 mile east), Bridge End (2 miles east) and Westwood (2 miles south-east). Larger places within reach include Newcastle-under-Lyme (10 miles south-west), Longton (9 miles south), Biddulph (4 miles west), Alsager (10 miles west), Kidsgrove (7 miles west) and Cheadle (10 miles south).

Near you in Rudyard

Around Rudyard, we work in homes near Westwood College, Church of St Michael and Horton St Michael's CofE First School and the streets around them. Well-known places in the area include St Edward's Hospital (3.1 miles south-east) and Brindley Mill And James Brindley Museum (1.9 miles south-east). Not far away are Coombes Valley RSPB reserve and Gun.

Map of Rudyard © OpenStreetMap contributors

Questions from Rudyard

Can you reseal over the old silicone?

All the old sealant comes out. Fresh silicone doesn’t stick to old.

Can I get a quote without a visit?

Normally, yes. A close-up and a wider photo are enough to give a fixed price.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

When can I use the bath after resealing?

Normally about a day later. We will tell you the exact time.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Can you repair several things at once?

Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Signs you need bath resealing in Rudyard

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.

Most people get in touch when they notice one of these:

  • Mould you can’t clean out
  • Damp near the bath
  • Silicone smeared on tiles
  • Old sealant that looks dirty

What to look for in a quote

  • How the room is protected while they work
  • Aftercare advice
  • How long the guarantee is and what it covers
  • How the colour is matched

How to compare quotes

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

How to look after the repair

To keep it looking its best for years:

  • Reseal when black spots will not clean off
  • Use the extractor fan
  • Clean the sealant gently and regularly
  • Keep the joints dry

Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.

For landlords and businesses

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

We’re used to working with agents and managing companies. Send the address, photos and access details.

Honest limits

Before you book, it’s worth knowing the limits:

  • Hidden water damage
  • Tiles that move, until they’re refixed
  • Very wide gaps that need a trim

Not sure? Send pictures and we’ll give you a straight answer before you book.

What we work on

  • Basins & vanity units
  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & sinks

Why it’s worth resealing in Rudyard

Putting new silicone over old doesn’t last. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why us?

  • Repair technicians who travel to you, UK-wide
  • Accredited with CHAS, Constructionline and SafeContractor
  • Nothing taken out or refitted
  • A year’s guarantee on all work

Take a look at our pricing.

What we do, step by step

Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow around two hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Open a window if you can
  • Plan for the room to be out of bounds to pets and children

Getting a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a fixed quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.