Wiltshire · England
Bath Resealing for Salisbury homes
Local bath resealing for Salisbury: photo quotes, tidy work and a year’s guarantee.
- Leaks at the edges
- Discoloured, yellow sealant
- Silicone coming away from the tiles
About our bath resealing in Salisbury
We reseal baths with them filled with water, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Typical jobs include unsealed corners and mould you can’t clean out, in baths, wet rooms and basins & vanity units.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Salisbury (SP2, SP1, SP5)
- County
- Wiltshire
- Cover
- One year on every repair
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Salisbury
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
What happens next?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
How do I book?
Photos of the damage, a photo of the entire bath or shower and your postcode. After that, we just agree a date.
Which areas do you work in?
Across the UK, so Salisbury is covered. Our prices are the same everywhere.
How long does resealing take?
Normally a couple of hours, then it needs to cure.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Loose tiles, which need refixing first
- Hidden water damage
- Gaps so wide they need filling or trims before sealing
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Salisbury
- Wet rooms
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Salisbury use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
How we price bath resealing
There are no hourly rates or hidden extras. The price is based on:
- How hard the colour is to match
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- What the surface is made of
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- A clear, close picture of the problem area
- One picture of the entire bath or shower
- What it’s made of, if you know
- Natural light rather than flash
If you are in Salisbury and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Is resealing worth it?
A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Work done at your home or business
- Everything repaired in place
- Rooms protected and left tidy
- Same prices wherever you are
Take a look at our full price list.
Places near Salisbury
What else we do in Salisbury
Where we work around Salisbury
Salisbury is about 21 miles north-west of Southampton, in Wiltshire. We visit homes and businesses in Salisbury, so there’s no workshop to go to. Our repair technicians cover all 425 towns and villages in Wiltshire. Our nearest city page is London, about 79 miles away.
Jobs in SP2, SP1 and SP5 are booked in the same way as anywhere else. Jobs here include addresses on Market Walk, St Thomas's Square and St Thomas Square. Main roads around Salisbury include the A30 and A36, which makes travel easy. Neighbouring places we cover include Bugmore (1 mile south), Milford (1 mile south-east), Laverstock (1 mile east), Harnham (1 mile south) and Ford (2 miles north-east). We also work in nearby towns such as Amesbury (7 miles north), Bulford (8 miles north), Wilton (3 miles west), Tisbury (12 miles west), Durrington (9 miles north) and Downton (6 miles south). As one of the bigger places in Wiltshire, Salisbury sees plenty of our work.
Around Salisbury
Our customers here include homes close to George and Dragon pub, former Church of St Edmund and Chafyn Grove School and the streets around them. You’ll also find Sarum St Paul's CofE (VA) Primary School (under half a mile west), South Wilts Grammar School (under half a mile north) and Corn Exchange (under half a mile south). The nearest railway station is Salisbury station, about 0.5 miles south-west of the centre. Further afield, we also cover the area around Harvard Hospital (1.5 miles south) and Old Sarum Castle (1.3 miles north). The countryside around Salisbury includes Harnham Hill.
What we are called out for in Salisbury
Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.
It’s worth getting a quote if you see:
- Leaks at the edges
- Silicone coming away from the tiles
- Unsealed corners
- Black spots in the silicone
What to look for in a quote
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- Whether there are any call-out or travel charges
- What protection goes down before work starts
What we do, step by step
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. It usually takes around two hours, and you are welcome to carry on with your day while we work.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
How to prepare
- Make sure the area is dry
- Clear the area around the damage
- Tell us if there are stairs or a lift
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Dry the seal after bathing
- Ventilate the bathroom well
- Air the room after use
- Reseal at the first sign of lifting
Let it cure fully before using the bath or shower, normally about a day.
Damp below or loose tiles need checking quickly. It may be more than a reseal, and we’ll say if you need a builder or plumber.
What your bath or shower is made of matters
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, for the same reason.
About our accreditations · Every repair comes with a one-year guarantee.
