North Ayrshire · Scotland
Bath Resealing for Saltcoats homes
Bath, shower and sink resealing with new mould-resistant silicone in Saltcoats, carried out at your home and guaranteed for a year.
- Mould you cannot clean out
- Gaps in the seal
- A messy previous reseal
Bath resealing in Saltcoats without replacing anything
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. We work on baths, wet rooms and shower trays & enclosures, and the jobs we see most are black mould in the sealant and gaps by the taps.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Location
- Saltcoats (KA21)
- Area hub
- North Ayrshire
- Warranty
- One year on every repair
- Quote
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
What bath resealing costs
There’s no area surcharge for Saltcoats. What changes the price is:
- How much damage there is
- Access to the area
- Unusual colours or finishes
- Doing more than one item at once
The price reflects the work involved, not where you live. The full price is agreed before you book.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Any details about the material
- Where you are, by postcode
- Any earlier repairs or coatings
- Something in shot to show the size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can price the job without visiting.
Nearby places to Saltcoats
Also in Saltcoats
What happens on the day
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the job itself takes about two hours for a bath. At the end we talk you through the curing time and the aftercare.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Mention any earlier repairs or resurfacing
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Saltcoats: your questions answered
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Do you work in Saltcoats?
We do. Technicians travel to Saltcoats from across the region, and the price is the same as everywhere else.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can new silicone go over old?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Saltcoats and nearby
Saltcoats is about 5 miles west of Irvine, in North Ayrshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover 53 places across North Ayrshire, from the larger towns to small villages. You can also see our page for Glasgow, about 25 miles away.
Jobs in KA21 work the same way as everywhere else we cover. Whether you live on Martin Square, High Road and Lindsay Avenue or a nearby road, a technician can come to you. Being close to the A738 and B714, Saltcoats is easy for our technicians to reach. If you’re just outside Saltcoats, we cover Auchenharvie (1 mile east), Ardrossan (1 mile north-west), Stevenston (1 mile east), Ardeer (2 miles south-east) and Kilwinning (3 miles east). We also work in nearby towns such as Irvine (5 miles east), Largs (11 miles north), Kilbirnie (9 miles north-east), West Kilbride (4 miles north-west), Girdle Toll (5 miles east) and Beith (10 miles north-east). Saltcoats is among the bigger towns we cover in North Ayrshire.
Near you in Saltcoats
Typical jobs here are in homes near The Salt Cot pub, St Matthew's Academy and Auchenharvie Academy. Also close by are Saltcoats (within half a mile east) and Stevenston Beach (1.3 miles south-east). For rail, the closest station is Saltcoats station, about 0.6 miles south. Further afield, we also cover the area around Ardrossan Castle (1 mile west) and North Ayrshire Heritage Centre (0.5 miles south). For a walk, there’s Law Hill and Stevenston Loch.
Different materials, different repairs
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
Baths are resealed with water in them, so the joint is at its widest.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
When to call us in Saltcoats
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning can’t get it all out.
If you can see any of these, send us a picture:
- Stained silicone
- Black spots in the silicone
- Leaks at the edges
- Gaps in the seal
What your quote should include
- How long it needs to cure
- Who turns up on the day
- Whether the colour is mixed to match
- How the room is protected while they work
Honest limits
Before booking, it’s worth knowing the limits too:
- Water damage behind the bath that needs a builder
- Hollow or loose tiles
- Gaps too big for silicone alone
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Saltcoats
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Ventilate the bathroom well
- Keep bottles off the joints
- Open a window after bathing
- Keep the joints dry
Leave the sealant to cure for the time we give you, normally about a day.
Black mould in sealant isn’t just unsightly. Resealing early keeps water out of the walls and floor.
About our accreditations · Every repair comes with a one-year guarantee.
