East Riding of Yorkshire · England
Bath & shower resealing (mastic) in Snaith, East Riding of Yorkshire
Bath resealing in Snaith without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Old sealant that looks dirty
- Silicone coming away from the tiles
- Black mould in the sealant
How we handle bath resealing in Snaith
A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why so many DIY reseals peel. We’re frequently asked to fix stained silicone and sealant that’s split or lifting, in baths, shower trays & enclosures and kitchen worktops & sinks.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Where
- Snaith (DN14)
- Region
- East Riding of Yorkshire
- Cover
- A year, on every repair
- Price
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Snaith
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Towns and villages near Snaith
Also in Snaith
Why it’s worth resealing in Snaith
Putting new silicone over old does not last. It soon peels, and mould stays trapped behind it. We remove the old sealant completely. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- No extra charge for your area
- Dust sheets down, tidy finish
- One-year guarantee on every repair
- Technicians who travel to you, UK-wide
Take a look at our prices page.
Snaith: your questions answered
Why does my sealant keep splitting?
Generally because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
How long does a reseal take?
Around two hours for a bath, then it needs to cure.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Why does mould come back so fast?
Typically poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
How long before I can shower?
Generally after around 24 hours. We will tell you the exact time.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Prices and what affects them
Every quote is fixed and free. What we look at:
- How many areas need work
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your photos
Phone pictures are fine. Just make sure we can see:
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Email us pictures of the damage and one of the entire item, and tell us you’re in Snaith, and we’ll reply with a fixed price.
About Snaith
Snaith is about 6 miles north-west of Thorne, in East Riding of Yorkshire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Snaith is one of 299 places in East Riding of Yorkshire where we work. Our jobs stretch from Snaith to Leeds (23 miles away).
Postcode districts we cover here: DN14. From Market Place, High Street and Court Gardens or anywhere nearby, we can come to you. We also cover the places around Snaith: West Cowick (1 mile south-east), Gowdall (1 mile west), Pollington (2 miles south-west), Pincheon Green (3 miles south) and Topham (3 miles south-west). We also work in nearby towns such as Goole (7 miles east), Howden (8 miles north-east), Gilberdyke (13 miles east), Eggborough (5 miles west), Holme upon Spalding Moor (14 miles north-east) and Newport (14 miles east).
What’s near Snaith
Around Snaith, we work in homes near The Plough Inn, Snaith Primary School and Clifton Pre-preparatory School. Other local landmarks include Church of St Lawrence (within half a mile north-west) and The Snaith School (less than half a mile west). There is a railway station in Snaith itself: Snaith station.
What a repair can’t fix
Before you book, it’s worth knowing the limits:
- Gaps so wide they need filling or trims before sealing
- Hollow or loose tiles
- Water damage behind the bath that needs a builder
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Baths
- Basins & vanity units
How to care for the repair
Looking after the surface is easy:
- Use the extractor fan
- Replace the seal when mould sets in
- Store bottles on a shelf
- Clean the joints with a mild cleaner
Let it cure fully before using the bath or shower, normally about a day.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
Materials and what they mean for the repair
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
Baths are resealed with water in them, to open the joint fully.
How it works
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for around two hours. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed quote the same day in most cases.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
