Kent · England
Bath Resealing for St Mary's Bay homes
We travel to St Mary's Bay for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- Black spots in the silicone
- Water getting behind the bath or tray
- An untidy old seal
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Bath resealing at your home in St Mary's Bay
A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. We work on shower trays & enclosures, basins & vanity units and wet rooms, and common reasons people contact us are gaps in the seal and unsealed corners.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- St Mary's Bay (TN29)
- County
- Kent
- Warranty
- 12 months on all our work
- Price
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
To be straight with you, there are a few things a repair will not fix:
- Water damage behind the bath that needs a builder
- Movement in the bath or tray
- Loose tiles, which need refixing first
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
- Wet rooms
- Shower trays & enclosures
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Give the seal a regular clean
- Replace the seal when mould sets in
- Use the extractor fan
- Keep bottles off the joints
Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
St Mary's Bay and nearby
St Mary's Bay is about 6 miles south-west of Hythe, in Kent. Whether you’re in the middle of St Mary's Bay or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 922 towns and villages across Kent, from the larger towns to small villages. You can also see our page for London, about 57 miles away.
Postcode districts we cover here: TN29. Local streets include Maple Drive, Oak Drive and Beechwood Close, all of which we cover. We also travel to St Mary in the Marsh (1 mile west), Burmarsh (3 miles north), Newchurch (3 miles north-west), Postling Green (5 miles north) and Bonnington (6 miles north). We also work in nearby towns such as Ashford (10 miles north-west), Folkestone (10 miles north-east), Hythe (6 miles north-east), Hawkinge (11 miles north-east), Tenterden (13 miles west) and Cheriton (9 miles north-east).
Near you in St Mary's Bay
Typical jobs here are in homes near Romney Warren Country Park, The Marsh Academy and All Saints, among other places. A little further out are Romney 'castle' (3.6 miles west).
Also near St Mary's Bay
What else we do in St Mary's Bay
Materials and what they mean for the repair
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Baths
Baths are resealed with water in them, so the joint is at its widest.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a couple of hours. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Getting ready for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
Get a quote
If you’re in St Mary's Bay and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
FAQs for St Mary's Bay
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
What happens next?
We review the photos and send a fixed quote.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
How much does bath resealing cost in St Mary's Bay?
Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Signs you need bath resealing in St Mary's Bay
Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
The things customers typically mention when they call include:
- Silicone smeared on tiles
- Stained silicone
- Mould you cannot clean out
- Silicone coming away from the tiles
Questions to ask before you book
- Aftercare advice
- What happens if the damage is worse than the pictures show
- What protection goes down before work starts
- Who will actually do the work
Why it’s worth resealing in St Mary's Bay
Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
What you get with us
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
See our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
