Oxfordshire · England
Bath Resealing for Standlake homes
Bath resealing in Standlake without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Water getting behind the bath or tray
- Missing sealant behind the taps
- Gaps in the seal
Different materials, different repairs
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Bath resealing at your home in Standlake
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We work on kitchen worktops & sinks, baths and basins & vanity units, and the jobs we see most are missing sealant behind the taps and gaps in the seal.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Standlake (OX29)
- County
- Oxfordshire
- Warranty
- One year on every repair
- Price
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Why reseal now?
A reseal is one of the cheapest bathroom jobs there is, and it protects everything around the bath. Leaving failed sealant can let water cause damage that costs far more to fix. The price reflects the work involved, not where you live. The full price is agreed before booking.
Why Standlake customers choose us
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- A fixed quote before booking
- Honest advice, even when it means no job
Read our pricing.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What a repair cannot fix
It helps to know what we can’t do:
- Hidden water damage
- A flexing bath
- Gaps so wide they need filling or trims before sealing
If in doubt, send pictures and we will say what we think.
Materials we repair
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Baths
What we are called out for in Standlake
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.
Send us a photo if you notice any of these:
- A messy previous reseal
- Gaps by the taps
- Silicone coming away from the tiles
- Stained silicone
What your quote should include
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- When it can be used again
- Who will actually do the work
Questions from Standlake
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
How long does a reseal take?
Most reseals take about two hours. Leave it to cure before use.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How do I book?
Photos of the damage, a photo of the whole bath or shower and your postcode. After that, we just agree a date.
What happens after I send pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
How the visit works
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes around two hours, and we leave the room as we found it.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
Before we arrive
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
Get a quote
Email us a picture of the damage and one of the whole item, with your OX29 postcode, and we will reply with a fixed quote.
Read more
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Clean the joints with a mild cleaner
- Use the extractor fan
- Reseal when black spots won’t clean off
- Dry the seal after bathing
Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
Also near Standlake
What else we do in Standlake
Prices and what affects them
We do not charge extra for travel to Standlake. The price comes down to:
- Unusual colours or finishes
- How easy the damage is to reach
- What kind of damage it is
- Previous DIY repairs that have to come out
We charge the same wherever you are, with no extra for Standlake. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Details of any past repairs
- A photo taken from further back
- Something in shot to show the size
- Any details about the material
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.
Standlake and the surrounding area
Standlake is about 5 miles south-east of Witney, in Oxfordshire. Across the OX29 area, we carry out the work at your property. We work in all 443 towns and villages across Oxfordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 55 miles away.
Our visits in OX29 are booked in the same way as anywhere else. Local streets include High Street, Manor Crescent and Horns Way. Other places close to Standlake include Brighthampton (1 mile west), Hardwick (2 miles north-west), Stanton Harcourt (2 miles north-east), South Leigh (3 miles north) and Ducklington (4 miles north-west). We also work in nearby towns such as Oxford (9 miles east), Didcot (11 miles south-east), Abingdon-on-Thames (7 miles south-east), Witney (5 miles north-west), Carterton (8 miles west) and Wantage (9 miles south).
Near you in Standlake
Typical jobs here are in homes near St Giles' Church, Mulberry Bush School and Standlake Church of England Primary School and the streets around them. Nearby you’ll also find Hinton Waldrist Castle (2.9 miles south-west). Open spaces near Standlake include Hitchcopse Pit and Cumnor Hill.
About our accreditations · Every repair comes with a one-year guarantee.
