Hampshire · England

Bath Resealing for Stanswood homes

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Stanswood and across Hampshire. Send pictures for a free, fixed quote.

  • Gaps in the seal
  • Damp near the bath
  • A messy previous reseal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Stanswood homes

About our bath resealing in Stanswood

A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. We regularly repair baths, basins & vanity units and wet rooms, and people most often call us about black spots in the silicone and an untidy old seal.

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Stanswood (SO45)
Area hub
Hampshire
Guarantee
One year on every repair
Quote
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

How we price bath resealing

There’s no charge for travel to Stanswood. The price depends on:

  • The size and number of damaged areas
  • Any earlier repairs that need removing first
  • The material and finish
  • The colour and finish to match

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Getting a price from photos

Almost every job we do is priced from pictures. This is what to send:

  • A close-up of the damage, in focus
  • A wider photo showing the entire bath or shower
  • The material, if you know it
  • Your postcode, so we can check dates

The quickest way to a price is to send two or three photos using our quote form or ring us. We will say immediately if a repair is the right fix.

When to call us in Stanswood

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.

Keep an eye out for these signs:

  • Discoloured, yellow sealant
  • Gaps in the seal
  • Unsealed corners
  • Black mould in the sealant

Before booking anyone

  • How soon you can use it again
  • Whether the colour is mixed to match
  • What happens if the damage is worse than the photos show
  • Aftercare advice

10 questions to ask before booking

Covering Stanswood

Stanswood is about 3 miles north-west of Cowes, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Stanswood is one of 683 places in Hampshire we cover. Our jobs stretch from Stanswood to London (72 miles away).

Postcode districts we cover here: SO45. Close by, we cover Sprat's Down (1 mile north), Calshot (1 mile north-east), Hillhead (1 mile north-east), Langley (1 mile west) and Blackfield (2 miles north-west). Further out, we also cover Gosport (8 miles east), Eastleigh (11 miles north), Fareham (7 miles north-east), Totton (11 miles north-west), Chandler's Ford (13 miles north) and Hedge End (8 miles north).

Near you in Stanswood

We visit homes around St George. The closest station to Stanswood is Hamble station, about 4.8 miles north. Well-known places in the area include Coldeast (5.4 miles north-east) and Calshot Castle (2 miles north-east). Green spaces nearby include Mill Hill and Mercury Marshes.

Map of Stanswood © OpenStreetMap contributors

Repairs by material

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Baths

We fill the bath before sealing, to open the joint fully.

Why it’s worth resealing in Stanswood

Resealing is a small job. Putting off a reseal can let water reach the walls and floor, which costs far more to put right. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • One visit for most repairs
  • No extra charge for your area
  • Everything repaired in place
  • CHAS and Constructionline accredited

Take a look at our prices page.

What happens on the day

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow around two hours from start to finish. Before leaving, we tell you when it can be used and how to look after it.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

How to prepare

  • Tell us if there are stairs or a lift
  • Tell us about any previous repairs or coatings
  • Ensure the room can be ventilated

Get a quote

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a fixed price

Related advice

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Landlords, letting agents and housing providers in Stanswood use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Keeping it looking good

To keep it looking its best:

  • Reseal at the first sign of lifting
  • Clean the joints with a mild cleaner
  • Keep bottles off the joints
  • Air the room after use

Let it cure fully before using the bath or shower, normally about a day.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.

Honest limits

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Gaps so wide they need filling or trims before sealing
  • Tiles that move, until they’re refixed
  • Rotten walls or floors behind the bath

Not sure? Send photos and we’ll give you a straight answer before booking.

Surfaces we repair

  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths
  • Shower trays & enclosures

Stanswood questions

Can you quote from photos?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Which areas do you work in?

All of Hampshire, and the rest of the UK. There is no extra charge for travel.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

How do I book?

Photos of the damage, a photo of the whole bath or shower and your postcode. Then we’ll agree a date.

I’m a tenant. Can you help?

We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

My seal keeps tearing. Why?

Normally because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.

Do you come to Stanswood?

Yes. We work across the UK and travel to Stanswood. Send us photos for a fixed quote, or call 0345 017 0787.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.