Poole · England
Bath Resealing for Sterte homes
Bath resealing in Sterte without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Mould you cannot clean out
- Stained silicone
- Water getting behind the bath or tray
Our work in Sterte
Sterte is about 1 mile south-west of Poole, in Poole. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Sterte is one of 18 places in Poole where we work.
Every address in BH15 and BH16 is covered. We regularly work on streets such as Maple Road, High Street and Sterte Road and the roads around them. Sterte sits on or near the A350, so getting to you is simple. We also cover the places around Sterte: Longfleet (1 mile east), Oakdale (1 mile north-east), Stanley Green (1 mile north), Poole (1 mile north-east) and Sea View (1 mile east). Within a short drive, we also cover Rossmore (3 miles east), Alder Hills (3 miles east), Branksome (3 miles east), Branksome Park (3 miles east), Talbot Woods (4 miles east) and Canford Cliffs (3 miles south-east).
Near you in Sterte
We visit homes around Poole High School, Poole Methodist Church and The Brewers Arms Public House. Other local landmarks include Poole Park (0.6 miles south-east) and Oakdale Junior School (less than half a mile north). Sterte has its own railway station: Poole station. Further afield, we also cover the area around Poole (0.5 miles south) and Dolphin Shopping Centre (within half a mile south). The countryside around Sterte includes Ham Common (LNR) and Beacon Hill.
Bath resealing at your home in Sterte
The key to a good reseal is getting all of the old silicone out. New silicone won’t bond to old, which is why so many DIY reseals peel. We are often asked to fix black spots in the silicone and gaps by the taps, on basins & vanity units, baths and wet rooms.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Sterte (BH15, BH16)
- Area hub
- Poole
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Nearby places to Sterte
More services for Sterte
When we’d advise against a repair
In fairness, there are a few things a repair will not fix:
- Gaps too big for silicone alone
- A flexing bath
- Hollow or loose tiles
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
- Baths
Your questions about bath resealing in Sterte
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
What happens if you find more damage?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
Which areas do you work in?
All of Poole, and the rest of the UK. Travel is included in the price.
Can you price it without visiting?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Why does mould come back so fast?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
How we price bath resealing
There is no charge for travel to Sterte. The price comes down to:
- The size and number of damaged areas
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- Your postcode, so we can check dates
- One sharp close-up of the damage
- One picture of the entire bath or shower
- Details of any past repairs
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Why reseal now?
A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Sterte customers choose us
- Honest advice, even when it means no job
- One-year guarantee on every repair
- Normally one visit, start to finish
- We come to you, anywhere in the UK
See our prices page.
Looking after it afterwards
Once the work has cured, treat it gently:
- Ventilate the bathroom well
- Let steam out after showers
- Reseal when black spots will not clean off
- Keep the joints dry
Avoid scraping the joints, and keep shampoo bottles off the joints.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a couple of hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- All the old sealant is cut out and removed.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
How to prepare
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
How to get a price
Send us a photo of the damage and a wider shot of the entire item, and tell us you are in Sterte, and we will reply with a fixed quote.
Related advice
Signs you need bath resealing in Sterte
A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.
Most people get in touch when they notice one of these:
- Silicone coming away from the tiles
- Old sealant that looks dirty
- Unsealed corners
- An untidy old seal
What to look for in a quote
- How soon you can use it again
- The length of the guarantee and what it covers
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
