Poole · England
Bath Resealing in Rossmore
Our repair technicians come to Rossmore for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Black mould in the sealant
- Old sealant that looks dirty
- A messy previous reseal

What bath resealing costs
There is no area surcharge for Rossmore. What changes the price is:
- What kind of damage it is
- The material
- The size and number of damaged areas
- How many items we do on one visit
Our prices are the same across the UK, with no extra for Rossmore. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
You can generally get a fixed quote without us visiting. To help us price it:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Where you are, by postcode
- What it’s made of, if you know
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
How we handle bath resealing in Rossmore
We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours, then it needs to cure. Our repair technicians work on baths, basins & vanity units and wet rooms, and people most frequently call us about discoloured, yellow sealant and an untidy old seal.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.

- Where
- Rossmore (BH12, BH14, BH17)
- County
- Poole
- Cover
- A year, on every repair
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Rossmore
What else we do in Rossmore
Aftercare tips
After the repair has cured, a few habits help it last:
- Reseal at the first sign of lifting
- Give the seal a regular clean
- Use the extractor fan
- Store bottles on a shelf
Good ventilation is the best protection, and dry the joints after bathing.
Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.
Resealing in Rossmore: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Typically one visit, start to finish
- No need to remove anything
- Technicians who travel to you, UK-wide
- We leave the room as we found it
Take a look at our prices page.
FAQs for Rossmore
How long will it take?
Around two hours for a bath, then it needs to cure.
What does bath resealing cost?
Every job gets a fixed price from your pictures. Send a close-up and a photo of the whole item and your postcode.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
How long before I can shower?
Normally after around 24 hours. We confirm before we leave.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Do you come to Rossmore?
Yes, we do. Technicians travel to Rossmore from across the region, with no extra charge for travel.
How do I book?
Photos of the damage, a photo of the entire bath or shower and your postcode. Then we’ll agree a date.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Movement in the bath or tray
- Hollow or loose tiles
- Gaps too big for silicone alone
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Basins & vanity units
- Baths
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
The process
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow around two hours, and we’ll keep you posted as we go.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
Get a quote
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Read more
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Rossmore and nearby
Rossmore is about 1 mile east of Poole, in Poole. Across the BH12 area, we carry out the work at your property. Our repair technicians cover 18 places across Poole.
Here we cover the BH12, BH14 and BH17 postcode area. Local streets include New Road, Good Road and Sark Road, and we cover them all. Rossmore is on the A3040, so it’s easy for us to reach. Close by, we cover Alderney (1 mile west), Alder Hills (1 mile east), Penn Hill (1 mile south), Branksome (1 mile south-east) and Sea View (1 mile south-west). Larger places within reach include Sterte (3 miles west), Waterloo (3 miles west) and Canford Cliffs (3 miles south).
What’s near Rossmore
Typical jobs here are in homes near St Aldhelm's Academy, St Aldhelm's Academy and Alexandra Park. Nearby too are The Good Shepherd (under half a mile north-west) and St Joseph's Catholic Primary School (under half a mile east). The nearest railway station is Branksome station, about 0.9 miles south-east of the centre. Further afield, we also cover the area around Bournemouth (2.5 miles south-east) and Brownsea Castle (3.7 miles south). For a walk, there is Ham Common (LNR) and Beacon Hill.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Common problems we fix in Rossmore
In time, even good sealant discolours particularly in a well-used bathroom. Steam, soap and movement all take their toll.
If you can see any of these, send us a photo:
- Silicone coming away from the tiles
- Stained silicone
- Damp near the bath
- Mould you cannot clean out
Before you book anyone
- Who will actually do the work
- How your room will be protected
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
About our accreditations · Every repair comes with a one-year guarantee.

