Bath and North East Somerset · England
Bath & shower resealing (mastic) in Stock, Bath and North East Somerset
Our technicians come to Stock for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- Damp near the bath
- Unsealed corners
- Mould you can’t clean out
Bath resealing in Stock, done in place
The key to a good reseal is getting all of the old silicone out. New silicone won’t bond to old, which is why many DIY jobs peel. If you are dealing with missing sealant behind the taps and silicone smeared on tiles, we can usually put it right.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Stock (BS40)
- County
- Bath and North East Somerset
- Warranty
- One year on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair is not the answer
It helps to know what we cannot do:
- Loose tiles, which need refixing first
- Gaps so wide they need filling or trims before sealing
- Rotten walls or floors behind the bath
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Baths
What affects the price in Stock
Every quote is fixed and free. What we take into account:
- Any earlier repairs that need removing first
- The material and finish
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
It only takes a minute to photograph the damage. Try to send:
- Details of any past repairs
- The material, if you know it
- Good light, ideally daylight, without flash glare
- One picture of the whole bath or shower
If you’re in Stock and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
About Stock
Stock is about 5 miles south of Nailsea, in Bath and North East Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover 136 places across Bath and North East Somerset.
We cover every part of the BS40 postcode area. Streets in the area include Stock Lane and Duck Lane, and we cover them all. We also cover the places around Stock: Blackmoor (1 mile south-east), Iwood (1 mile north), Lower Langford (1 mile south-east), Churchill (1 mile south) and Udley (1 mile north). Within a short drive, we also cover Keynsham (13 miles east), Paulton (13 miles east), Saltford (14 miles east), Timsbury (13 miles east), High Littleton (12 miles east) and Clutton (11 miles east).
Near you in Stock
Our customers here include homes close to Churchill Academy & Sixth Form, Stag & Hounds pub and St Mary's Church and the streets around them. The nearest railway station is Yatton station, about 3.3 miles north-west of the centre. Other landmarks nearby include Banwell Museum (3.8 miles south-west) and Banwell Castle (3.6 miles south-west). Not far away are Cadbury Hill and Kingswood.
Common questions in Stock
Can you reseal over the old silicone?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
How do I get a price for bath resealing in Stock?
We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Do you cover the entire of Bath and North East Somerset?
All of Bath and North East Somerset, and the rest of the UK. Travel is included in the price.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
How long does resealing take?
Generally a couple of hours, plus curing time.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Run the extractor fan during and after showers
- Air the room after use
- Reseal at the first sign of lifting
- Wipe the joints dry after use
Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.
Also in Stock
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
When to call us in Stock
Sealant doesn’t last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.
Most people get in touch after spotting one of these:
- Unsealed corners
- Silicone coming away from the tiles
- Silicone smeared on tiles
- Water getting behind the bath or tray
What to look for in a quote
- Aftercare advice
- Whether the price is fixed and includes VAT
- How long it needs to cure
- What preparation is included
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
Baths are resealed with water in them, so the joint is at its widest.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a couple of hours. At the end we talk you through the curing time and the aftercare.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
- Point us to the nearest place to park
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
