Coventry · England
Bath & shower resealing (mastic) in Stoke Heath, Coventry
Bath resealing across Stoke Heath and nearby, done in a single visit in most cases.
- Black spots in the silicone
- Leaks at the edges
- Sealant that is split or lifting
Resealing in Stoke Heath: why it matters
Putting new silicone over old does not last. It soon peels, and traps mould underneath. We remove the old sealant completely. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
- We leave the room as we found it
- Nothing taken out or refitted
Take a look at our full price list.
Bath resealing in Stoke Heath without replacing anything
A fresh seal protects your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. Our technicians work on shower trays & enclosures, kitchen worktops & sinks and wet rooms, and people most frequently call us about black mould in the sealant and silicone coming away from the tiles.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Stoke Heath (CV2, CV6, CV1)
- Region
- Coventry
- Guarantee
- One year on every repair
- Quote
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair won’t do:
- Very wide gaps that need a trim
- A flexing bath
- Hidden water damage
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Stoke Heath
- Shower trays & enclosures
- Wet rooms
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
Stoke Heath questions
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Do you seal over the old sealant?
We always remove the old sealant completely. New silicone will not bond to old.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How long does resealing take?
A bath or shower usually takes a couple of hours. Leave it to cure before use.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Why does mould come back so fast?
Mould needs moisture. Ventilation and drying keep it clean longer.
Where we work around Stoke Heath
Stoke Heath is about 1 mile north-east of Coventry, in Coventry. Jobs in Stoke Heath are booked in like any other job: a fixed price from your photos, then a visit to do the work. Stoke Heath is one of 88 places in Coventry where we work. We work right across the region, from Stoke Heath to Birmingham (about 18 miles away).
Our repair technicians cover all of the CV2, CV6 and CV1 postcode area and the streets around it. Streets in the area include Red Lane, Gun Lane and Bryn Road, and we cover them all. You will find Stoke Heath on the A444, so it’s easy for us to reach. We also cover the places around Stoke Heath: Courthouse Green (1 mile north), Edgwick (1 mile north-west), Upper Stoke (1 mile south-east), Bell Green (1 mile north-east) and Wyken (1 mile south-east). Within a short drive, we also cover Earlsdon (3 miles south-west), Balsall Common (7 miles west), Chapelfields (3 miles south-west), Allesley Green (4 miles west), Whoberley (3 miles west) and Willenhall (3 miles south).
What’s near Stoke Heath
Around Stoke Heath, we work in homes near Lyng Hall School, St. Alban's Church and Stoke Heath Primary School, among other places. Nearby too are Jalalabad Mosque & Education Centre pub (0.7 miles south-west) and Henley College (0.8 miles north-east). For rail, the closest station is Coventry Arena station, about 1.8 miles north. Nearby you’ll also find Coventry and Warwickshire Hospital (1.3 miles south-west) and Arena Park Shopping Centre (1.5 miles north). Not far away are Brandon Marsh.
How it works
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow around two hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Getting ready for the visit
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
Nearby places to Stoke Heath
Other services in Stoke Heath
What affects the price in Stoke Heath
You will not pay by the hour. The price is based on:
- Access to the area
- Doing more than one item at once
- Any earlier repairs that need removing first
- The material
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- One sharp close-up of the damage
- Any details about the material
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, for the same reason.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Let steam out after showers
- Reseal at the first sign of lifting
- Clean the sealant gently and regularly
- Run the extractor fan during and after showers
Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. It may be more than a reseal, and we’ll say if you need a builder or plumber.
Common problems we fix in Stoke Heath
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint flexes each time the bath fills.
Signs it’s time to call us include:
- Gaps by the taps
- Silicone coming away from the tiles
- Water getting behind the bath or tray
- Black spots in the silicone
Comparing quotes
- What the guarantee covers, and for how long
- Who turns up on the day
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
