Dorset · England

Bath Resealing in Stour Row

Bath resealing for Stour Row, without a refit. Send us photos for a fixed price, then book a visit.

  • Leaks at the edges
  • An untidy old seal
  • Black mould in the sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Stour Row

Bath resealing in Stour Row, done in place

A proper reseal starts with removing every trace of the old silicone. New silicone will not bond to old, which is why many DIY jobs peel. We are frequently asked to fix missing sealant behind the taps and mould you can’t clean out, in basins & vanity units, shower trays & enclosures and wet rooms.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Area
Stour Row (SP7)
Area hub
Dorset
Guarantee
A year, on every repair
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Why it’s worth resealing in Stour Row

Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Why choose Surface Doctor in Stour Row

  • Nothing taken out or refitted
  • We come to you, anywhere in the UK
  • Generally one visit, start to finish
  • Rooms protected and left tidy

Read our pricing.

Different materials, different repairs

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Covering Stour Row

Stour Row is about 10 miles north-west of Blandford Forum, in Dorset. Jobs in Stour Row are booked in like any other job: a fixed quote from photos, then a visit to do the work. Stour Row is one of 462 towns and villages in Dorset where we work.

All of SP7 is covered, from the main roads to the quietest streets. Jobs here include addresses on Church Close, Dover Street and Green Lane. Close by, we cover Woodville (1 mile west), Guy's Marsh (1 mile east), Stour Provost (2 miles west), Todber (2 miles south-west) and Hartgrove (2 miles south-east). Further out, we also cover Blandford Forum (10 miles south-east), Gillingham (4 miles north), Shaftesbury (3 miles north-east), Sherborne (12 miles west), Peacemarsh (4 miles north) and Sturminster Newton (5 miles south-west).

Landmarks near Stour Row

Our clients here include homes close to All Saints Church and Stower Provost Community School, among other places. Stour Row’s nearest station is Gillingham (Dorset) station, roughly 3.2 miles north. Nearby you’ll also find Gold Hill Museum (2.7 miles north-east) and Westminster Memorial Hospital (2.5 miles north-east). Green spaces nearby include Melbury Hill.

Map of Stour Row © OpenStreetMap contributors

Do you need bath resealing in Stour Row?

A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.

These are the problems we’re asked about most:

  • Damp near the bath
  • Mould you can’t clean out
  • Old sealant that looks dirty
  • Silicone coming away from the tiles

Before booking anyone

  • Whether the price is fixed and includes VAT
  • Who turns up on the day
  • How soon you can use it again
  • How changes to the job are handled

Choosing a repair company

What we do, step by step

We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes about two hours for a bath, and we leave the room as we found it.

  1. All the old sealant is cut out and removed.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Let the surface dry out before the visit
  • Let us know which floor the room is on

Ask for a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Advice

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Replace the seal when mould sets in
  • Keep bottles off the joints
  • Air the room after use
  • Clean the joints with a mild cleaner

Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

How we price bath resealing

Every quote is fixed and free. What we take into account:

  • Any earlier repairs that need removing first
  • The material and finish
  • How easy the damage is to reach
  • Doing more than one item at once

Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.

Quotes from your pictures

You can take the pictures on your phone. Just ensure we can see:

  • Where you are, by postcode
  • A wider photo showing the whole bath or shower
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed quote.

Landlord and trade work in Stour Row

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

We work for landlords, letting agents and housing providers in Stour Row as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Stour Row: your questions answered

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Do you cover Stour Row?

Yes. We cover the entire UK and come to Stour Row. Send us pictures for a fixed quote, or call 0345 017 0787.

Do the materials smell?

Expect a mild smell while we are working.

Why does my sealant keep going mouldy?

Mould needs moisture. Ventilation and drying keep it clean longer.

Can new silicone go over old?

Never over old. It’s removed, cleaned off and the joint dried first.

What happens once I’ve sent pictures?

We review the photos and send a fixed quote.

What does bath resealing cost?

Every job gets a fixed quote from your photos. Send a close-up and a photo of the whole item and your postcode.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.