South Ayrshire · Scotland

Bath Resealing in Straiton

We travel to Straiton for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.

  • Stained silicone
  • Unsealed corners
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Straiton

Bath resealing at your home in Straiton

All of the old sealant is cut out, deal with any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Whether it’s black mould in the sealant and damp near the bath, we can help.

Every repair is covered by our one-year guarantee, wherever you are in South Ayrshire.

Location
Straiton (KA19)
Area hub
South Ayrshire
Guarantee
A year, on every repair
Quote
Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Looking after it afterwards

Looking after the surface is easy:

  • Open a window after bathing
  • Keep the joints dry
  • Reseal when black spots won’t clean off
  • Run the extractor fan during and after showers

Leave the sealant to cure for the time we give you, generally around 24 hours.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.

Why it’s worth resealing in Straiton

Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Why choose Surface Doctor in Straiton

  • Everything repaired in place
  • Every repair guaranteed for a year
  • Most jobs done in one visit
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our full price list.

Our work in Straiton

Straiton is about 10 miles south of Ayr, in South Ayrshire. Clients in Straiton get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We cover all 52 towns and villages across South Ayrshire. You can also see our page for Glasgow, about 39 miles away.

Here we cover the KA19 postcode area. Whether you live on Main Street, Dalmellington Road and Knockbreck Road or anywhere nearby, a technician can come to you. We also cover the places around Straiton: Kirkmichael (3 miles north-west), Crosshill (4 miles west), Patna (4 miles north-east), Waterside (4 miles north-east) and Maybole (6 miles north-west). Further out, we also cover Ayr (10 miles north), Prestwick (13 miles north), Heathfield (12 miles north), Belmont (10 miles north), Forehill (10 miles north) and Girvan (13 miles south-west).

Near you in Straiton

Around Straiton, we work in homes near Straiton Parish Church. Well-known places in the area include Blairquhan Castle (1 mile west). Open spaces near Straiton include Baing Loch.

Map of Straiton © OpenStreetMap contributors

What affects the price in Straiton

There’s no charge for travel to Straiton. The price comes down to:

  • Previous DIY repairs that have to come out
  • How hard the colour is to match
  • How easy the damage is to reach
  • The type of damage

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed price

A couple of clear pictures is all it takes. It helps if you send:

  • Where you are, by postcode
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.

Different materials, different repairs

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

What we are called out for in Straiton

No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.

Look out for these signs:

  • Unsealed corners
  • Sealant that’s split or lifting
  • Old sealant that looks dirty
  • Leaks at the edges

Comparing quotes

  • How soon you can use it again
  • What preparation is included
  • Whether they match the colour on site
  • What happens if they find more damage

Choosing a repair company

What we cannot put right

A repair isn’t right for every job, for example:

  • Tiles that move, until they’re refixed
  • Rotten walls or floors behind the bath
  • Gaps too big for silicone alone

If in doubt, send pictures and we’ll say what we think before booking.

Surfaces we repair

  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units

FAQs for Straiton

Are there extra charges for Straiton?

Travel is included in the price, and we charge the same wherever you are.

When can I use the bath after resealing?

You will get the curing time from us.

Is it worth repairing rather than replacing?

Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

Can I get a quote without a visit?

Usually, yes. A close-up and a wider photo are enough to give a fixed price.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Which areas do you work in?

Everywhere in the UK, Straiton included. There is no extra charge for travel.

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

How it works

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take about two hours for a bath. We clean up when we are done and tell you when it’s ready to use.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep pets and children out of the room while we work
  • Mention any earlier repairs or resurfacing

How to get a price

To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.

Get a free quote

Read more

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.