Kent · England
Bath Resealing for Sturry homes
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Sturry. Send photos for a free, fixed quote.
- Leaks at the edges
- Stained silicone
- Sealant that is split or lifting
Bath resealing in Sturry, done in place
The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. We work on shower trays & enclosures, kitchen worktops & sinks and baths, and people most often call us about leaks at the edges and old sealant that looks dirty.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Sturry (CT2)
- Area hub
- Kent
- Warranty
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
You will know the full cost before you book. We take into account:
- The type of damage
- Whether we combine several jobs
- What the surface is made of
- Where the damage is and how we get to it
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from photos
Two or three clear photos are usually enough. It helps if you send:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- One picture of the whole bath or shower
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
What we can’t put right
In fairness, some problems need a different fix:
- Tiles that move, until they’re refixed
- A flexing bath
- Gaps too big for silicone alone
Send us pictures and we will tell you honestly.
Materials we work on in Sturry
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Baths
- Kitchen worktops & sinks
Sturry and the surrounding area
Sturry is about 3 miles north-east of Canterbury, in Kent. We visit clients in Sturry and the surrounding area, so there is no workshop to go to. We cover all 922 towns and villages across Kent. We work right across the region, from Sturry to London (54 miles away).
Postcode districts we cover here: CT2. Jobs here include addresses on High Street, Park View and Link Road and the roads around them. We also travel to Broad Oak (1 mile west), Westbere (1 mile east), Calcott (1 mile north), Hersden (2 miles east) and Hicks Forstal (2 miles north). We also work in nearby towns such as Canterbury (3 miles south-west), Margate (12 miles north-east), Dover (14 miles south-east), Folkestone (15 miles south), Ramsgate (13 miles east) and Broadstairs (14 miles east).
Landmarks near Sturry
Locally, our jobs take us to homes close to The Swan Inn, Spires Academy and Chequer's Wood and Old Park and the streets around them. Nearby too are Sturry Church of England Primary School (less than half a mile north-east), St Nicholas' Church (0.5 miles south) and Frank Montgomery School (1.2 miles east). There is a railway station in Sturry itself: Sturry station. Other landmarks nearby include Canterbury Roman Museum (2.6 miles south-west) and St Martins Hospital (2.1 miles south). Green spaces nearby include West Blean and Thornden Woods.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which usually takes a couple of hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Preparing for the visit
- Make sure the room can be ventilated
- Let us know about parking or access
- Make sure the area is dry
Getting a price
Email us pictures of the damage and one of the entire item, and tell us you’re in Sturry, and we’ll reply with a fixed price.
Read more
Repairs by material
Baths
We fill the bath before sealing, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Is resealing worth it?
Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Straight answers about what a repair can do
- Every repair guaranteed for a year
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
Read our prices page.
Aftercare tips
Simple care helps the repair last. We recommend:
- Let steam out after showers
- Ventilate the bathroom well
- Reseal when black spots will not clean off
- Dry the seal after bathing
Leave the sealant to cure for the time we give you, generally around 24 hours.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Sturry: your questions answered
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
What areas do you cover?
Everywhere in the UK, Sturry included. Travel is included in the price.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Sturry.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
When can I use the bath after resealing?
We’ll give you the curing time.
Why does my sealant keep splitting?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
Nearby places to Sturry
More services for Sturry
Do you need bath resealing in Sturry?
Even good sealant eventually discolours particularly in a well-used bathroom. Steam, soap and movement all wear it down.
Common reasons people in Sturry contact us include:
- Black spots in the silicone
- Gaps in the seal
- Water getting behind the bath or tray
- Stained silicone
Comparing quotes
- How to care for the finish
- If travel is included in the price
- How the colour is matched
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
