Kent · England
Bath Re-enamelling for Sturry homes
Full bath re-enamelling and resurfacing at your home in Sturry, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
About our bath re-enamelling in Sturry
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. We work on Victorian roll-tops, basins & shower trays and pressed steel baths, and common reasons people get in touch are chips and rust in more than one place and a bath that stays dull however much you clean it.
All our work is covered by a one-year guarantee.
- Location
- Sturry (CT2)
- Area hub
- Kent
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Sturry
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- A dripping tap should be fixed promptly
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Never use suction bath mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the next day.
How to prepare
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Advice
What we’re called out for in Sturry
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.
It’s worth getting a quote if you see:
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- An old resurfacing that’s failing
- Stains that will not shift
Questions to ask before you book
- What preparation is included
- Who turns up on the day
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
Our work in Sturry
Sturry is about 3 miles north-east of Canterbury, in Kent. From the centre of Sturry to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Sturry is one of 922 places in Kent we cover. Our jobs stretch from Sturry to London (about 54 miles away).
All of CT2 is covered. Whether you live on High Street, Park View and Link Road or anywhere nearby, a technician can come to you. We also travel to Broad Oak (1 mile west), Westbere (1 mile east), Calcott (1 mile north), Hersden (2 miles east) and Hicks Forstal (2 miles north). We also work in nearby towns such as Canterbury (3 miles south-west), Margate (12 miles north-east), Dover (14 miles south-east), Folkestone (15 miles south), Ramsgate (13 miles east) and Broadstairs (14 miles east).
Near you in Sturry
Around Sturry, we work in homes near The Swan Inn, Spires Academy and Chequer's Wood and Old Park, among other places. Nearby too are Sturry Church of England Primary School (within half a mile north-east), St Nicholas' Church (0.5 miles south) and Frank Montgomery School (1.2 miles east). There is a railway station in Sturry itself: Sturry station. Nearby you’ll also find Canterbury Roman Museum (2.6 miles south-west) and St Martins Hospital (2.1 miles south). Not far away are West Blean and Thornden Woods.
Sturry questions
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
How do I get a price for bath re-enamelling in Sturry?
Resurfacing from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly.
Materials we work on in Sturry
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- The material and finish
- The type of damage
- How easy the damage is to reach
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.
Quotes from your pictures
You can take the photos on your phone. Make sure they show:
- A coin or ruler next to the damage for scale
- The material, if you know it
- Where you are, by postcode
- Details of any past repairs
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Nearby places to Sturry
More services for Sturry
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
