Lincolnshire · England
Bath & shower resealing (mastic) in Swarby, Lincolnshire
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Swarby and across Lincolnshire. Send photos for a free, fixed quote.
- Gaps by the taps
- A messy previous reseal
- Water getting behind the bath or tray

Bath resealing in Swarby, done in place
All of the old sealant is cut out, deal with any mould, and reseal with new mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We regularly repair kitchen worktops & sinks, basins & vanity units and wet rooms, and people most frequently call us about silicone coming away from the tiles and black spots in the silicone.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- Swarby (NG34)
- County
- Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026

Swarby questions
Are there extra charges for Swarby?
No. Our quotes include travel, with the same prices everywhere we work.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Why does the silicone keep cracking?
Typically because the bath or tray moves. We fill the bath before sealing it.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Why does mould come back so fast?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Aftercare tips
After the repair has cured, a few habits help it last:
- Clean the joints with a mild cleaner
- Air the room after use
- Wipe the joints dry after use
- Replace the seal when mould sets in
Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Swarby, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Swarby and the surrounding area
Swarby is about 3 miles south of Sleaford, in Lincolnshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 732 towns and villages across Lincolnshire, from the larger towns to small villages. Our jobs stretch from Swarby to Birmingham (69 miles away).
We work across NG34. Local streets include Back Lane, Swarby Road and Aunsby Road, all of which we cover. Other places close to Swarby include Silk Willoughby (1 mile north), Osbournby (2 miles south-east), Greylees (2 miles north), Quarrington (2 miles north) and Sleaford (3 miles north). We also work in nearby towns such as Grantham (9 miles west), Bourne (13 miles south), Austerby (13 miles south), Pinchbeck (15 miles south-east), Spittlegate (9 miles south-west) and Gonerby Hill Foot (9 miles west).
Landmarks near Swarby
Locally, our jobs take us to homes close to Parish Church of St Mary and All Saints and the streets around them. Swarby’s nearest station is Rauceby station, about 2.3 miles north of the centre. Nearby you’ll also find Sleaford Castle (3.3 miles north) and Rauceby Hospital (2.2 miles north).
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, to open the joint fully.
When we would advise against a repair
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- A bath or tray that moves, until its support is fixed
- Hollow or loose tiles
- Gaps so wide they need filling or trims before sealing
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & vanity units
- Baths
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
What affects the price in Swarby
Each job gets its own fixed price. This is what makes a difference:
- The material
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Send pictures for a quote
You can take the photos on your phone. Just make sure we can see:
- Any details about the material
- Details of any past repairs
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Places near Swarby
Other services in Swarby
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
What you get with us
- Nothing taken out or refitted
- Straight answers about what a repair can do
- Same prices wherever you are
- We leave the room as we found it
Read our pricing.
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take about two hours for a bath, and you can get on with other things while we’re there.
- All the old sealant is cut out and removed.
- We clean the joint and treat any mould.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
Getting ready for the visit
- Let the surface dry out before the visit
- Ensure the room can be ventilated
- Let us know if it has been repaired before
How to get a price
To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.

