Somerset · England

Bath Resealing in Templecombe

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Templecombe and across Somerset. Send photos for a free, fixed quote.

  • Mould you can’t clean out
  • An untidy old seal
  • Sealant that’s split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Templecombe homes

Bath resealing in Templecombe, done in place

We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Our repair technicians work on kitchen worktops & sinks, basins & vanity units and baths, and people most frequently call us about silicone smeared on tiles and unsealed corners.

Big or small, it’s backed by a one-year guarantee in Templecombe and across Somerset.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Templecombe (BA8)
Area hub
Somerset
Cover
12 months on all our work
Quotes
Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Where we work around Templecombe

Templecombe is about 11 miles east of Yeovil, in Somerset. From the centre of Templecombe to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 640 towns and villages in Somerset, from the larger towns to small villages.

All of BA8 is covered, from the main roads to the quietest streets. Whether you live on High Street, Vine Street and Merthyr Guest Close or anywhere nearby, a technician can come to you. We also cover the places around Templecombe: Yenston (1 mile south-east), Henstridge Bowden (1 mile south-west), Milborne Wick (3 miles south-west), Milborne Port (3 miles south-west) and Purse Caundle (3 miles south). We also work in nearby towns such as Yeovil (11 miles west), Shepton Mallet (14 miles north-west), Wincanton (4 miles north), Somerton (15 miles west), Castle Cary (8 miles north-west) and Preston Plucknett (11 miles west).

Local landmarks in Templecombe

We visit homes around Church of St Mary and Abbas and Templecombe Church of England Primary School, among other places. There is a railway station in Templecombe itself: Templecombe station.

Map of Templecombe © OpenStreetMap contributors

Materials and what they mean for the repair

Shower trays

We put weight on a tray before sealing it, for the same reason.

Baths

Baths are resealed with water in them, so the joint is at its widest.

What we are called out for in Templecombe

In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.

Look out for any of the following:

  • Discoloured, yellow sealant
  • Black mould in the sealant
  • Unsealed corners
  • Silicone smeared on tiles

Comparing quotes

  • How the colour is matched
  • How your room will be protected
  • If travel is included in the price
  • How to look after the finish

Our hiring checklist

What we cannot put right

We won’t take on work that won’t last, so here’s what a repair can’t put right:

  • Rotten walls or floors behind the bath
  • Movement in the bath or tray
  • Loose tiles, which need refixing first

If in doubt, send pictures and we will say what we think before booking.

What we work on

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Wet rooms
  • Baths
  • Basins & vanity units

Aftercare tips

Simple care helps the repair last. We recommend:

  • Reseal when black spots won’t clean off
  • Keep bottles off the joints
  • Wipe the joints dry after use
  • Ventilate the bathroom well

Do not scrape the sealant with anything sharp, and don’t stand bottles on the seal.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

How the visit works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a couple of hours. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Before we arrive

  • Let us know if it has been repaired before
  • Let us know which floor the room is on
  • Tell us about parking, stairs or access

How to get a price

Upload a photo of the damage and a wider shot of the entire item, with your BA8 postcode, and we’ll come back with a fixed quote.

Send pictures for a quote

Related advice

Prices and what affects them

We price every job individually, from your pictures. The main factors are:

  • Whether we combine several jobs
  • How hard the colour is to match
  • The material and finish
  • How easy the damage is to reach

The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Quotes from your photos

Before you send pictures, these tips help us give you a firm price:

  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit
  • The material, if you know it
  • A coin beside the damage so we can judge size

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.

Landlords, agents and businesses in Templecombe

Landlords, letting agents and housing providers in Templecombe use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

We regularly work with letting and managing agents. Send the address, pictures and access details.

FAQs for Templecombe

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before.

Do you work in Templecombe?

Yes. We cover the entire UK and come to Templecombe. Send pictures and we’ll quote, or call 0345 017 0787.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Is there a call-out fee?

There is no separate call-out charge. The fixed price covers the visit and the work.

Can I get a quote without a visit?

Nearly always. If pictures don’t show enough, we will ask for another angle.

Do you cover the entire of Somerset?

We cover the whole UK, including Templecombe and the rest of Somerset. Just include your postcode and we’ll offer you dates.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Why it’s worth resealing in Templecombe

Sealing over old silicone is a false economy. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. Our prices are the same across the UK, so there’s no premium for Templecombe. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why Templecombe clients choose us

  • CHAS and Constructionline accredited
  • Rooms protected and left tidy
  • Fixed prices from your photos
  • Honest advice, even when it means no job

See our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.